From: Adam Ford <aford173@gmail.com>
To: linux-media@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, shawnguo@kernel.org,
aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Lucas Stach <l.stach@pengutronix.de>,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH V3 05/10] media: hantro: Allow i.MX8MQ G1 and G2 to run independently
Date: Sun, 23 Jan 2022 20:31:19 -0600 [thread overview]
Message-ID: <20220124023125.414794-6-aford173@gmail.com> (raw)
In-Reply-To: <20220124023125.414794-1-aford173@gmail.com>
The VPU in the i.MX8MQ is really the combination of Hantro G1 and
Hantro G2. With the updated vpu-blk-ctrl, the power domains system
can enable and disable them separately as well as pull them out of
reset. This simplifies the code and lets them run independently
while still retaining backwards compatibility with older device
trees for those using G1.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 6a51f39dde56..a670ddd29c4c 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -616,6 +616,7 @@ static const struct of_device_id of_hantro_match[] = {
#endif
#ifdef CONFIG_VIDEO_HANTRO_IMX8M
{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
+ { .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant },
{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
#endif
#ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 4a19ae8940b9..f0bd2ffe290b 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -299,6 +299,7 @@ enum hantro_enc_fmt {
ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
};
+extern const struct hantro_variant imx8mq_vpu_g1_variant;
extern const struct hantro_variant imx8mq_vpu_g2_variant;
extern const struct hantro_variant imx8mq_vpu_variant;
extern const struct hantro_variant px30_vpu_variant;
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index f5991b8e553a..849ea7122d47 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -205,13 +205,6 @@ static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
imx8m_soft_reset(vpu, RESET_G1);
}
-static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
-{
- struct hantro_dev *vpu = ctx->dev;
-
- imx8m_soft_reset(vpu, RESET_G2);
-}
-
/*
* Supported codec ops.
*/
@@ -237,17 +230,33 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
},
};
+static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
+ [HANTRO_MODE_MPEG2_DEC] = {
+ .run = hantro_g1_mpeg2_dec_run,
+ .init = hantro_mpeg2_dec_init,
+ .exit = hantro_mpeg2_dec_exit,
+ },
+ [HANTRO_MODE_VP8_DEC] = {
+ .run = hantro_g1_vp8_dec_run,
+ .init = hantro_vp8_dec_init,
+ .exit = hantro_vp8_dec_exit,
+ },
+ [HANTRO_MODE_H264_DEC] = {
+ .run = hantro_g1_h264_dec_run,
+ .init = hantro_h264_dec_init,
+ .exit = hantro_h264_dec_exit,
+ },
+};
+
static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
[HANTRO_MODE_HEVC_DEC] = {
.run = hantro_g2_hevc_dec_run,
- .reset = imx8m_vpu_g2_reset,
.init = hantro_hevc_dec_init,
.exit = hantro_hevc_dec_exit,
},
[HANTRO_MODE_VP9_DEC] = {
.run = hantro_g2_vp9_dec_run,
.done = hantro_g2_vp9_dec_done,
- .reset = imx8m_vpu_g2_reset,
.init = hantro_vp9_dec_init,
.exit = hantro_vp9_dec_exit,
},
@@ -267,6 +276,8 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
+static const char * const imx8mq_g1_clk_names[] = { "g1" };
+static const char * const imx8mq_g2_clk_names[] = { "g2" };
const struct hantro_variant imx8mq_vpu_variant = {
.dec_fmts = imx8m_vpu_dec_fmts,
@@ -287,6 +298,21 @@ const struct hantro_variant imx8mq_vpu_variant = {
.num_regs = ARRAY_SIZE(imx8mq_reg_names)
};
+const struct hantro_variant imx8mq_vpu_g1_variant = {
+ .dec_fmts = imx8m_vpu_dec_fmts,
+ .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
+ .postproc_fmts = imx8m_vpu_postproc_fmts,
+ .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
+ .postproc_ops = &hantro_g1_postproc_ops,
+ .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
+ HANTRO_H264_DECODER,
+ .codec_ops = imx8mq_vpu_g1_codec_ops,
+ .irqs = imx8mq_irqs,
+ .num_irqs = ARRAY_SIZE(imx8mq_irqs),
+ .clk_names = imx8mq_g1_clk_names,
+ .num_clocks = ARRAY_SIZE(imx8mq_g1_clk_names),
+};
+
const struct hantro_variant imx8mq_vpu_g2_variant = {
.dec_offset = 0x0,
.dec_fmts = imx8m_vpu_g2_dec_fmts,
@@ -296,10 +322,8 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
.postproc_ops = &hantro_g2_postproc_ops,
.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
.codec_ops = imx8mq_vpu_g2_codec_ops,
- .init = imx8mq_vpu_hw_init,
- .runtime_resume = imx8mq_runtime_resume,
.irqs = imx8mq_g2_irqs,
.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
- .clk_names = imx8mq_clk_names,
- .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
+ .clk_names = imx8mq_g2_clk_names,
+ .num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
};
--
2.32.0
next prev parent reply other threads:[~2022-01-24 2:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-24 2:31 [PATCH V3 00/10] media: hantro: imx8mq/imx8mm: Let VPU decoders get controlled by vpu-blk-ctrl Adam Ford
2022-01-24 2:31 ` [PATCH V3 01/10] dt-bindings: power: imx8mq: add defines for VPU blk-ctrl domains Adam Ford
2022-01-24 2:31 ` [PATCH V3 02/10] dt-bindings: soc: add binding for i.MX8MQ VPU blk-ctrl Adam Ford
2022-01-24 2:31 ` [PATCH V3 03/10] soc: imx: imx8m-blk-ctrl: add " Adam Ford
2022-01-24 2:31 ` [PATCH V3 04/10] dt-bindings: media: nxp, imx8mq-vpu: Split G1 and G2 nodes Adam Ford
2022-01-24 18:10 ` Ezequiel Garcia
2022-01-24 2:31 ` Adam Ford [this message]
2022-01-24 18:09 ` [PATCH V3 05/10] media: hantro: Allow i.MX8MQ G1 and G2 to run independently Ezequiel Garcia
2022-01-24 2:31 ` [PATCH V3 06/10] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl Adam Ford
2022-01-24 17:59 ` Ezequiel Garcia
2022-01-24 2:31 ` [PATCH V3 07/10] arm64: dts: imx8mm: Fix VPU Hanging Adam Ford
2022-01-24 2:31 ` [PATCH V3 08/10] dt-bindings: media: nxp, imx8mq-vpu: Add support for G1 on imx8mm Adam Ford
2022-01-24 17:55 ` Ezequiel Garcia
2022-01-24 2:31 ` [PATCH V3 09/10] media: hantro: Add support for i.MX8MM Hantro-G1 Adam Ford
2022-01-24 17:48 ` Ezequiel Garcia
2022-01-24 2:31 ` [PATCH V3 10/10] arm64: dts: imx8mm: Enable Hantro G1 and G2 video decoders Adam Ford
2022-01-25 16:48 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220124023125.414794-6-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).