From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>, Tero Kristo <kristo@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH 1/6] arm64: dts: ti: k3-j721s2-main: Add support for USB
Date: Tue, 25 Jan 2022 18:41:08 +0530 [thread overview]
Message-ID: <20220125131113.727-2-a-govindraju@ti.com> (raw)
In-Reply-To: <20220125131113.727-1-a-govindraju@ti.com>
Add support for single instance of USB 3.0 controller in J721S2 SoC.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b04db1d3ab61..e651f0af1aaa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -26,6 +26,20 @@
};
};
+ scm_conf: scm-conf@104000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00 0x00104000 0x00 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00104000 0x18000>;
+
+ usb_serdes_mux: mux-controller@0 {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+ };
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
@@ -683,6 +697,34 @@
};
};
+ usbss0: cdns-usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x04104000 0x00 0x100>;
+ clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 360 17>;
+ power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+
+ usb0: usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x06000000 0x00 0x10000>,
+ <0x00 0x06010000 0x00 0x10000>,
+ <0x00 0x06020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+
main_mcan0: can@2701000 {
compatible = "bosch,m_can";
reg = <0x00 0x02701000 0x00 0x200>,
--
2.17.1
next prev parent reply other threads:[~2022-01-25 13:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 13:11 [PATCH 0/6] J721S2: Add support for additional IPs Aswath Govindraju
2022-01-25 13:11 ` Aswath Govindraju [this message]
2022-01-25 13:11 ` [PATCH 2/6] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Aswath Govindraju
2022-01-25 13:11 ` [PATCH 3/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Aswath Govindraju
2022-01-25 13:11 ` [PATCH 4/6] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Aswath Govindraju
2022-01-25 13:11 ` [PATCH 5/6] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Aswath Govindraju
2022-01-25 13:11 ` [PATCH 6/6] arm64: dts: k3-j721s2: Add support for OSPI Flashes Aswath Govindraju
2022-02-02 20:50 ` [PATCH 0/6] J721S2: Add support for additional IPs Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125131113.727-2-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).