devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>, Tero Kristo <kristo@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
	Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH 3/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Tue, 25 Jan 2022 18:41:10 +0530	[thread overview]
Message-ID: <20220125131113.727-4-a-govindraju@ti.com> (raw)
In-Reply-To: <20220125131113.727-1-a-govindraju@ti.com>

Add support for two instance of OSPI in J721S2 SoC.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7521963719ff..569db20f356f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47040000 0x00 0x100>,
+			      <0x5 0x0000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 109 5>;
+			assigned-clocks = <&k3_clks 109 5>;
+			assigned-clock-parents = <&k3_clks 109 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47050000 0x00 0x100>,
+			      <0x7 0x0000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 110 5>;
+			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+	};
 };
-- 
2.17.1


  parent reply	other threads:[~2022-01-25 13:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-25 13:11 [PATCH 0/6] J721S2: Add support for additional IPs Aswath Govindraju
2022-01-25 13:11 ` [PATCH 1/6] arm64: dts: ti: k3-j721s2-main: Add support for USB Aswath Govindraju
2022-01-25 13:11 ` [PATCH 2/6] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Aswath Govindraju
2022-01-25 13:11 ` Aswath Govindraju [this message]
2022-01-25 13:11 ` [PATCH 4/6] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Aswath Govindraju
2022-01-25 13:11 ` [PATCH 5/6] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Aswath Govindraju
2022-01-25 13:11 ` [PATCH 6/6] arm64: dts: k3-j721s2: Add support for OSPI Flashes Aswath Govindraju
2022-02-02 20:50 ` [PATCH 0/6] J721S2: Add support for additional IPs Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220125131113.727-4-a-govindraju@ti.com \
    --to=a-govindraju@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).