Re: [PATCH v7 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm evk board

[Shawn Guo <shawnguo@kernel.org>]

On Thu, Dec 02, 2021 at 04:02:37PM +0800, Richard Zhu wrote:
> Add the PCIe support on iMX8MM EVK boards.
> And set the default reference clock mode.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
> Tested-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> index e033d0257b5a..87a30daf0b3c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> @@ -5,6 +5,7 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>  #include <dt-bindings/usb/pd.h>
>  #include "imx8mm.dtsi"
>  
> @@ -30,6 +31,23 @@ status {
>  		};
>  	};
>  
> +	pcie0_refclk: pcie0-refclk {
> +		compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <100000000>;

Incorrect indent.  Fixed them up and applied.

Shawn

> +	};
> +
> +	reg_pcie0: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcie0_reg>;
> +		regulator-name = "MPCIE_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -289,6 +307,30 @@ pca6416: gpio@20 {
>  	};
>  };
>  
> +&pcie_phy {
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> +	fsl,tx-deemph-gen1 = <0x2d>;
> +	fsl,tx-deemph-gen2 = <0xf>;
> +	clocks = <&pcie0_refclk>;
> +	status = "okay";
> +};
> +
> +&pcie0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
> +	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
> +		 <&pcie0_refclk>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> +	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> +			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
> +	assigned-clock-rates = <10000000>, <250000000>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> +				 <&clk IMX8MM_SYS_PLL2_250M>;
> +	vpcie-supply = <&reg_pcie0>;
> +	status = "okay";
> +};
> +
>  &sai3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_sai3>;
> @@ -406,6 +448,19 @@ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
>  		>;
>  	};
>  
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
> +			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
> +		>;
> +	};
> +
> +	pinctrl_pcie0_reg: pcie0reggrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
> +		>;
> +	};
> +
>  	pinctrl_pmic: pmicirqgrp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
> -- 
> 2.25.1
>