From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] arm64: dts: tqma8mqml: add PCIe support
Date: Wed, 26 Jan 2022 14:23:38 +0100 [thread overview]
Message-ID: <20220126132339.60683-1-alexander.stein@ew.tq-group.com> (raw)
Add PCIe support to TQMa8MxML series.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
This goes on top of the series recently applied to pci/dwc [1]:
[PATCH v7 0/8] Add the imx8m pcie phy driver and imx8mm pcie support
Changes in v2:
* rebased to Shawn's current imx/dt64 (as of 2022/01/26)
[1] https://patchwork.kernel.org/project/linux-pci/list/?series=589031&state=*
.../dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 19 +++++++++++++++++++
.../boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 5 +++++
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 ++++++
3 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 7844878788f4..286d2df01cfa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm-tqma8mqml.dtsi"
#include "mba8mx.dtsi"
@@ -58,6 +59,24 @@ expander2: gpio@27 {
};
};
+&pcie_phy {
+ clocks = <&pcie0_refclk>;
+ status = "okay";
+};
+
+&pcie0 {
+ reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
&sai3 {
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 284e62acc0b4..16ee9b5179e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -227,6 +227,11 @@ eeprom0: eeprom@57 {
};
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index f27e3c8de916..3ea34b3a55f8 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -66,6 +66,12 @@ led2: led2 {
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_hub_vbus: regulator-hub-vbus {
compatible = "regulator-fixed";
regulator-name = "MBA8MX_HUB_VBUS";
--
2.25.1
next reply other threads:[~2022-01-26 13:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 13:23 Alexander Stein [this message]
2022-02-11 3:50 ` [PATCH v2 1/1] arm64: dts: tqma8mqml: add PCIe support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126132339.60683-1-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).