From: michael.srba@seznam.cz
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Saravana Kannan <saravanak@google.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, Michael Srba <Michael.Srba@seznam.cz>
Subject: [PATCH v4 2/5] clk: qcom: gcc-msm8998: add SSC-related clocks
Date: Wed, 26 Jan 2022 19:32:47 +0100 [thread overview]
Message-ID: <20220126183250.11924-2-michael.srba@seznam.cz> (raw)
In-Reply-To: <20220126183250.11924-1-michael.srba@seznam.cz>
From: Michael Srba <Michael.Srba@seznam.cz>
This patch adds four clocks which need to be manipulated in order to
initialize the AHB bus which exposes the SCC block in the global address
space.
If a device is known to be configured such that writing to these
registers from Linux is not permitted, the 'protected-clocks'
device tree property must be used to denote that fact.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
---
CHANGES:
- v2: none
- v3: none
- v4: reword the commit message
---
drivers/clk/qcom/gcc-msm8998.c | 56 ++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 407e2c5caea4..2d14c3d672fc 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2833,6 +2833,58 @@ static struct clk_branch gcc_rx1_usb2_clkref_clk = {
},
};
+static struct clk_branch gcc_im_sleep_clk = {
+ .halt_reg = 0x4300C,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4300C,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_im_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch aggre2_snoc_north_axi_clk = {
+ .halt_reg = 0x83010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x83010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "aggre2_snoc_north_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch ssc_xo_clk = {
+ .halt_reg = 0x63018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x63018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "ssc_xo_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch ssc_cnoc_ahbs_clk = {
+ .halt_reg = 0x6300C,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6300C,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "ssc_cnoc_ahbs_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct gdsc pcie_0_gdsc = {
.gdscr = 0x6b004,
.gds_hw_ctrl = 0x0,
@@ -3036,6 +3088,10 @@ static struct clk_regmap *gcc_msm8998_clocks[] = {
[GCC_MSS_MNOC_BIMC_AXI_CLK] = &gcc_mss_mnoc_bimc_axi_clk.clkr,
[GCC_MMSS_GPLL0_CLK] = &gcc_mmss_gpll0_clk.clkr,
[HMSS_GPLL0_CLK_SRC] = &hmss_gpll0_clk_src.clkr,
+ [GCC_IM_SLEEP] = &gcc_im_sleep_clk.clkr,
+ [AGGRE2_SNOC_NORTH_AXI] = &aggre2_snoc_north_axi_clk.clkr,
+ [SSC_XO] = &ssc_xo_clk.clkr,
+ [SSC_CNOC_AHBS_CLK] = &ssc_cnoc_ahbs_clk.clkr,
};
static struct gdsc *gcc_msm8998_gdscs[] = {
--
2.34.1
next prev parent reply other threads:[~2022-01-26 18:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 18:32 [PATCH v4 1/5] dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks michael.srba
2022-01-26 18:32 ` michael.srba [this message]
2022-01-26 18:32 ` [PATCH v4 3/5] dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus michael.srba
2022-01-26 22:10 ` Rob Herring
2022-02-01 17:26 ` Rob Herring
2022-01-26 18:32 ` [PATCH v4 4/5] drivers: bus: add driver for initializing the SSC bus on (some) qcom SoCs michael.srba
2022-01-26 18:32 ` [PATCH v4 5/5] arm64: dts: qcom: msm8998: reserve potentially inaccessible clocks michael.srba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126183250.11924-2-michael.srba@seznam.cz \
--to=michael.srba@seznam.cz \
--cc=agross@kernel.org \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).