From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com>,
<alexandre.belloni@bootlin.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<robh+dt@kernel.org>, Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH] ARM: dts: at91: sama7g5: Add crypto nodes
Date: Fri, 4 Feb 2022 15:37:51 +0200 [thread overview]
Message-ID: <20220204133751.498600-1-tudor.ambarus@microchip.com> (raw)
Describe and enable the AES, SHA and TDES crypto IPs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7972cb8c2562..1f2731a64139 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
clock-names = "pclk", "gclk";
};
+ aes: aes@e1810000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xe1810000 0x100>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+ clock-names = "aes_clk";
+ status = "okay";
+ };
+
+ sha: sha@e1814000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xe1814000 0x100>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+ clock-names = "sha_clk";
+ status = "okay";
+ };
+
flx0: flexcom@e1818000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe1818000 0x200>;
@@ -475,6 +498,18 @@ trng: rng@e2010000 {
status = "disabled";
};
+ tdes@e2014000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xe2014000 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+ <&dma0 AT91_XDMAC_DT_PERID(53)>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
+
flx4: flexcom@e2018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe2018000 0x200>;
--
2.25.1
next reply other threads:[~2022-02-04 13:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 13:37 Tudor Ambarus [this message]
2022-02-04 17:36 ` [PATCH] ARM: dts: at91: sama7g5: Add crypto nodes Tudor.Ambarus
2022-02-04 17:42 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204133751.498600-1-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox