[PATCH 2/2] arm64: dts: qcom: c630: Move panel to aux-bus

[Bjorn Andersson <bjorn.andersson@linaro.org>]

With the newly introduced aux-bus under the TI SN65DSI86 the panel
node should be described as a child instead of a standalone node, move
it there.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +++++++++----------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 55fb7302245b..fd1261901ab5 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -56,20 +56,6 @@ mode {
 		};
 	};
 
-	panel {
-		compatible = "boe,nv133fhm-n61";
-		no-hpd;
-		backlight = <&backlight>;
-
-		ports {
-			port {
-				panel_in_edp: endpoint {
-					remote-endpoint = <&sn65dsi86_out>;
-				};
-			};
-		};
-	};
-
 	/* Reserved memory changes for IPA */
 	reserved-memory {
 		wlan_msa_mem: memory@8c400000 {
@@ -446,6 +432,19 @@ sn65dsi86_out: endpoint {
 				};
 			};
 		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "boe,nv133fhm-n61";
+				backlight = <&backlight>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
 	};
 };
 
-- 
2.32.0