From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 16F23C433F5 for ; Thu, 10 Feb 2022 09:44:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238916AbiBJJoY (ORCPT ); Thu, 10 Feb 2022 04:44:24 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:34082 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235159AbiBJJoX (ORCPT ); Thu, 10 Feb 2022 04:44:23 -0500 Received: from mail-wr1-x42e.google.com (mail-wr1-x42e.google.com [IPv6:2a00:1450:4864:20::42e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 712E4198 for ; Thu, 10 Feb 2022 01:44:24 -0800 (PST) Received: by mail-wr1-x42e.google.com with SMTP id d27so8469130wrc.6 for ; Thu, 10 Feb 2022 01:44:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20210112.gappssmtp.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=GYbokiO3VJ4iW65Dstshrb5gvbsv2dMAOZw4XcPc5q4=; b=ee07sKZuUW5Fzua3Sw51Mw7bjBEPymx+0jNhtyPf0igFS6yhsCAfQGkrk/GBlgpsE0 Yzm4WduYHn/qP0EkkrwzRj8K1Sv6+t1ZJLONpiv5qgyA+jmTYoGOHa3SD0M4hH7v22WM WtOnDop/iUyyvkU/BZKpf73aexOGewDvxRu3E2uS3TPohWRSBuYzg1Kb8GIW6fKJjaBm C216Y0QCumLti6ZDsDWT3a4Mmwy4bxSeIJsuVjcwWAFSmj22fCxnH2fzc6cs9bvMND5h i/QOcnRK957s4FN1XPK/twbiSbqsRWde9Td4aT69rWSDic4/PauBmWyWrLFb1sktAjhm pR7g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=GYbokiO3VJ4iW65Dstshrb5gvbsv2dMAOZw4XcPc5q4=; b=TUZ9YD2Lwx5ilTlvTm/86XbVV8IlZG/Pk3yYvT1wO/h/ZKHSnvfD6iTdv1wJsv+Dc5 uDsuHFTfd9pteqSEdnOmgYWCGgcswcXGsxEazfHuhT8c8RE3r2RTNPeqkO14VTbwjCP2 Mq/inCcT7nZ/RTC5H+NyXhoUPVDJ/zKVJd2F36xJioyDZKma4rBVJZr7Shcgzi9EyGtL Fj+ABbSzbqHQC2N08Ve97tyWroxCx9pA+SqFrFtL+YfR0Paqkfqx4Y0/p4M+PvtN4cg9 L2sFBEnvQlyKLnusmTMlQrc03ON0Nsh0GCzQsadzACALOSj3KvVBEsh1Ok9yd0PxMeMY VnwQ== X-Gm-Message-State: AOAM5323dioTwPQO3qa1m64/RhItZIkXbTjwyCgdi+cOkPeL0Z84HiU3 GMLIaE68BQLXg2ryUmDzyxNBRCy/qs9vNA== X-Google-Smtp-Source: ABdhPJzz1fvR+9MddyaPTLKd+vwNPOJs91LIu4TMck1tqi74rzqXIflDK7Xegr/DLz8AdO3+HYPwJg== X-Received: by 2002:adf:ee81:: with SMTP id b1mr5482077wro.149.1644486262956; Thu, 10 Feb 2022 01:44:22 -0800 (PST) Received: from localhost.localdomain (laubervilliers-658-1-213-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.googlemail.com with ESMTPSA id o14sm20609108wry.104.2022.02.10.01.44.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 10 Feb 2022 01:44:22 -0800 (PST) From: Corentin Labbe To: damien.lemoal@opensource.wdc.com, krzysztof.kozlowski@canonical.com, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, Corentin Labbe , Linus Walleij Subject: [PATCH v3] dt-bindings: convert ata/cortina,gemini-sata-bridge to yaml Date: Thu, 10 Feb 2022 09:44:14 +0000 Message-Id: <20220210094414.2815616-1-clabbe@baylibre.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This patch converts ata/cortina,gemini-sata-bridge binding to yaml Reviewed-by: Linus Walleij Acked-by: Damien Le Moal Signed-off-by: Corentin Labbe --- Change since v1: - fixed cosmetic nits reported by Damien Le Moal Changes since v2: - Added blank lines between properties - Removed useless quotes and label - Re-indented description .../ata/cortina,gemini-sata-bridge.txt | 55 --------- .../ata/cortina,gemini-sata-bridge.yaml | 107 ++++++++++++++++++ 2 files changed, 107 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt deleted file mode 100644 index 1c3d3cc70051..000000000000 --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Cortina Systems Gemini SATA Bridge - -The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that -takes two Faraday Technology FTIDE010 PATA controllers and bridges -them in different configurations to two SATA ports. - -Required properties: -- compatible: should be - "cortina,gemini-sata-bridge" -- reg: registers and size for the block -- resets: phandles to the reset lines for both SATA bridges -- reset-names: must be "sata0", "sata1" -- clocks: phandles to the compulsory peripheral clocks -- clock-names: must be "SATA0_PCLK", "SATA1_PCLK" -- syscon: a phandle to the global Gemini system controller -- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for - the ATA controller and SATA bridges. Values 0..3: - Mode 0: ata0 master <-> sata0 - ata1 master <-> sata1 - ata0 slave interface brought out on IDE pads - Mode 1: ata0 master <-> sata0 - ata1 master <-> sata1 - ata1 slave interface brought out on IDE pads - Mode 2: ata1 master <-> sata1 - ata1 slave <-> sata0 - ata0 master and slave interfaces brought out - on IDE pads - Mode 3: ata0 master <-> sata0 - ata0 slave <-> sata1 - ata1 master and slave interfaces brought out - on IDE pads - -Optional boolean properties: -- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection. - The muxmode setting decides whether ATA0 or ATA1 is brought out, - and whether master, slave or both interfaces get brought out. -- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge - inside the Gemnini SoC. The Muxmode decides what PATA blocks will - be muxed out and how. - -Example: - -sata: sata@46000000 { - compatible = "cortina,gemini-sata-bridge"; - reg = <0x46000000 0x100>; - resets = <&rcon 26>, <&rcon 27>; - reset-names = "sata0", "sata1"; - clocks = <&gcc GEMINI_CLK_GATE_SATA0>, - <&gcc GEMINI_CLK_GATE_SATA1>; - clock-names = "SATA0_PCLK", "SATA1_PCLK"; - syscon = <&syscon>; - cortina,gemini-ata-muxmode = <3>; - cortina,gemini-enable-ide-pins; - cortina,gemini-enable-sata-bridge; -}; diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file mode 100644 index 000000000000..f0fad63bb1af --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini SATA Bridge + +maintainers: + - Linus Walleij + +description: | + The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that + takes two Faraday Technology FTIDE010 PATA controllers and bridges + them in different configurations to two SATA ports. + +properties: + compatible: + const: cortina,gemini-sata-bridge + + reg: + minItems: 1 + + resets: + minItems: 2 + description: phandles to the reset lines for both SATA bridges + + reset-names: + items: + - const: sata0 + - const: sata1 + + clocks: + minItems: 2 + description: phandles to the compulsory peripheral clocks + + clock-names: + items: + - const: SATA0_PCLK + - const: SATA1_PCLK + + syscon: + minItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the global Gemini system controller + + cortina,gemini-ata-muxmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + - 2 + - 3 + description: | + Tell the desired multiplexing mode for the ATA controller and SATA bridges. Values 0..3: + Mode 0: ata0 master <-> sata0 + ata1 master <-> sata1 + ata0 slave interface brought out on IDE pads + Mode 1: ata0 master <-> sata0 + ata1 master <-> sata1 + ata1 slave interface brought out on IDE pads + Mode 2: ata1 master <-> sata1 + ata1 slave <-> sata0 + ata0 master and slave interfaces brought out on IDE pads + Mode 3: ata0 master <-> sata0 + ata0 slave <-> sata1 + ata1 master and slave interfaces brought out on IDE pads + + cortina,gemini-enable-ide-pins: + type: boolean + description: Enables the PATA to IDE connection. + The muxmode setting decides whether ATA0 or ATA1 is brought out, + and whether master, slave or both interfaces get brought out. + + cortina,gemini-enable-sata-bridge: + type: boolean + description: Enables the PATA to SATA bridge inside the Gemnini SoC. + The Muxmode decides what PATA blocks will be muxed out and how. + +required: + - clocks + - clock-names + - cortina,gemini-ata-muxmode + - resets + - reset-names + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + #include + sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&rcon 26>, <&rcon 27>; + reset-names = "sata0", "sata1"; + clocks = <&gcc GEMINI_CLK_GATE_SATA0>, + <&gcc GEMINI_CLK_GATE_SATA1>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-ide-pins; + cortina,gemini-enable-sata-bridge; + }; -- 2.34.1