From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [PATCH v2 01/18] ARM: dts: qcom: add multiple missing pin definition for ipq8064
Date: Fri, 18 Feb 2022 01:29:39 +0100 [thread overview]
Message-ID: <20220218002956.6590-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220218002956.6590-1-ansuelsmth@gmail.com>
Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
pins and rgmii2 pins for ipq8064.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 11481313bdb6..cc6ca9013ab1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -382,6 +382,15 @@ mux {
};
};
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -424,6 +433,8 @@ mux {
pullups {
pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
bias-pull-up;
};
@@ -431,9 +442,32 @@ hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
bias-bus-hold;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
intc: interrupt-controller@2000000 {
--
2.34.1
next prev parent reply other threads:[~2022-02-18 0:30 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-18 0:29 [PATCH v2 00/18] Multiple addition to ipq8064 dtsi Ansuel Smith
2022-02-18 0:29 ` Ansuel Smith [this message]
2022-02-18 0:29 ` [PATCH v2 02/18] ARM: dts: qcom: add gsbi6 missing definition for ipq8064 Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 03/18] ARM: dts: qcom: add missing rpm regulators and cells " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 04/18] ARM: dts: qcom: disable smb208 regulators for ipq8064-rb3011 Ansuel Smith
2022-02-22 18:53 ` Jonathan McDowell
2022-02-18 0:29 ` [PATCH v2 05/18] ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064 Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 06/18] ARM: dts: qcom: enable usb phy by default for ipq8064 Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 07/18] ARM: dts: qcom: reduce pci IO size to 64K " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 08/18] ARM: dts: qcom: fix dtc warning for missing #address-cells " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 09/18] ARM: dts: qcom: add smem node " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc " Ansuel Smith
2022-02-22 20:01 ` Jonathan McDowell
2022-02-24 17:49 ` Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 11/18] ARM: dts: qcom: add sic non secure node " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 12/18] ARM: dts: qcom: fix and add some missing gsbi " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 13/18] ARM: dts: qcom: add opp table for cpu and l2 " Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 14/18] ARM: dts: qcom: add speedbin efuse nvmem binding Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 15/18] ARM: dts: qcom: add multiple missing binding for cpu and l2 for ipq8064 Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 16/18] ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts Ansuel Smith
2022-02-18 14:11 ` Jonathan McDowell
2022-02-19 19:08 ` Jonathan McDowell
2022-02-20 14:50 ` Ansuel Smith
2022-02-20 14:44 ` Ansuel Smith
2022-02-22 18:29 ` Jonathan McDowell
2022-02-18 0:29 ` [PATCH v2 17/18] ARM: dts: qcom: add ipq8064-v2.0 dtsi Ansuel Smith
2022-02-18 0:29 ` [PATCH v2 18/18] ARM: dts: qcom: add ipq8065 dtsi Ansuel Smith
2022-02-22 20:06 ` [PATCH v2 00/18] Multiple addition to ipq8064 dtsi Jonathan McDowell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220218002956.6590-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).