From: Daniel Kestrel <kestrelseventyfour@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Daniel Kestrel <kestrelseventyfour@gmail.com>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] dt-bindings: remoteproc: Add AVM WASP
Date: Mon, 21 Feb 2022 14:53:51 +0100 [thread overview]
Message-ID: <20220221135351.GA7342@ubuntu> (raw)
AVM Fritzbox router boards may contain an additional ATH79
based SoC that has the wifi cards connected.
This patch adds bindings for this remote processor.
Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
---
.../bindings/remoteproc/avm,wasp-rproc.yaml | 93 +++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
new file mode 100644
index 000000000000..21f3bbcc4202
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVM WASP processor controller bindings
+
+maintainers:
+ - Daniel Kestrel <kestrelseventyfour@gmail.com>
+
+description: |
+ This document defines the bindings for the remoteproc component that loads and
+ boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
+ that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
+
+properties:
+ compatible:
+ const: avm,wasp
+
+ ath9k-firmware:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should contain the name of the ath9k eeprom that is to be loaded from
+ the lantiq host flash. Wifi on the WASP SoC does not work without it.
+ The file should be located on the firmware search path.
+
+ ath10k-caldata:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should contain the name of the ath10k caldata that is to be loaded from
+ the lantiq host flash. Wifi on the WASP SoC does not work without it.
+ The file should be located on the firmware search path.
+
+ wasp-netboot-firmware:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should contain the name of the netboot firmware that is to be loaded
+ and started on the WASP SoC using mdio in order to be able to load
+ the initramfs image as a second stage.
+ The file should be located on the firmware search path.
+
+ wasp-netboot-mdio:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the Lantiq GSWIP switch mdio.
+
+ wasp-initramfs-port:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the network port, where the WASP SoC is connected to.
+
+ wasp-initramfs-image:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should contain the name of the initramfs linux image that is to be loaded
+ and started on the WASP SoC.
+ The file should be located on the firmware search path.
+
+ reset-gpio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Reference and parameters for the reset gpio of the WASP SoC.
+
+ startup-gpio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Reference and parameters for the power switch gpio of the WASP SoC.
+
+required:
+ - compatible
+ - ath9k-firmware
+ - ath10k-caldata
+ - wasp-netboot-firmware
+ - wasp-netboot-mdio
+ - wasp-initramfs-port
+ - wasp-initramfs-image
+ - reset-gpio
+ - startup-gpio
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ avm-wasp {
+ compatible = "avm,wasp";
+ ath9k-firmware = "ath9k-eeprom-ahb-18100000.wmac.bin";
+ ath10k-caldata = "ath10k/cal-pci-0000:00:00.0.bin";
+ wasp-netboot-firmware = "netboot.fw";
+ wasp-netboot-mdio = <&gswip_mdio>;
+ wasp-initramfs-port = <&port5>;
+ wasp-initramfs-image = "avm_fritzx490-wasp-initramfs-kernel.bin";
+ reset-gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ startup-gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
--
2.17.1
next reply other threads:[~2022-02-21 13:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-21 13:53 Daniel Kestrel [this message]
2022-02-21 16:47 ` [PATCH 2/3] dt-bindings: remoteproc: Add AVM WASP Krzysztof Kozlowski
2022-02-22 15:27 ` Kestrel seventyfour
2022-02-23 7:06 ` Krzysztof Kozlowski
2022-02-24 16:07 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220221135351.GA7342@ubuntu \
--to=kestrelseventyfour@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).