[PATCH v2 3/3] ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm

[Andrej Picej <andrej.picej@norik.com>]

Instead of changing default pwm-cells property, use the default
"#pwm-cells = <3>" and add the third option.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Changes in v2:
 - no change
---
 arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
index 7cda6944501d..6ce534a896ef 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -11,7 +11,7 @@ backlight_lcd: backlight-lcd {
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <5>;
 		power-supply = <&reg_backlight_en>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		status = "disabled";
 	};
 
@@ -91,7 +91,6 @@ lcdif_parallel_out: endpoint {
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
-- 
2.25.1