[PATCH 1/2] arm64: dts: ti: k3-j721e-main: add DP & DP PHY

[Rahul T R <r-ravikumar@ti.com>]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

Add DT nodes for DisplayPort and DisplayPort PHY. The DP is Cadence MHDP
8546 and the PHY is a Cadence Torrent PHY with TI WIZ wrapper.

A slight irregularity in the bindings is the DPTX PHY register block,
which is in the MHDP IP, but is needed and mapped by the PHY.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 102 ++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 599861259a30..9e2b212100bb 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -786,6 +786,82 @@
 		#size-cells = <2>;
 	};
 
+	serdes_wiz4: wiz@5050000 {
+		compatible = "ti,j721e-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 297 9>;
+		assigned-clock-parents = <&k3_clks 297 10>;
+		assigned-clock-rates = <19200000>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		ranges = <0x5050000 0x0 0x5050000 0x10000>,
+			<0xa030a00 0x0 0xa030a00 0x40>;
+
+		wiz4_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 297 9>, <&cmn_refclk>;
+			clock-output-names = "wiz4_pll0_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz4_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 297 9>;
+		};
+
+		wiz4_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 297 9>, <&cmn_refclk>;
+			clock-output-names = "wiz4_pll1_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz4_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 297 9>;
+		};
+
+		wiz4_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 297 9>, <&cmn_refclk>;
+			clock-output-names = "wiz4_refclk_dig";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz4_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 297 9>;
+		};
+
+		wiz4_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz4_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz4_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz4_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes4: serdes@5050000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x5050000 0x10000>,
+			      <0xa030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy", "dptx_phy";
+
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&wiz4_pll0_refclk>;
+			clock-names = "refclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			torrent_phy_dp: phy@0 {
+				reg = <0>;
+				resets = <&serdes_wiz4 1>;
+				cdns,phy-type = <PHY_TYPE_DP>;
+				cdns,num-lanes = <4>;
+				cdns,max-bit-rate = <5400>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -1264,6 +1340,32 @@
 		};
 	};
 
+	mhdp: dp-bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		/*
+		 * Note: we do not map DPTX PHY area, as that is handled by
+		 * the PHY driver.
+		 */
+		reg = <0x0 0xa000000 0x0 0x30a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+		      <0x0 0x4f40000 0x0 0x20>;    /* DSS_EDP0_INTG_CFG_VP */
+		reg-names = "mhdptx", "j721e-intg";
+
+		clocks = <&k3_clks 151 36>;
+
+		phys = <&torrent_phy_dp>;
+		phy-names = "dpphy";
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg =
-- 
2.17.1