From: Michael Walle <michael@walle.cc>
To: Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: heiko.thiery@gmail.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Shawn Guo <shawnguo@kernel.org>, Michael Walle <michael@walle.cc>
Subject: [PATCH v2 1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs
Date: Thu, 24 Feb 2022 11:30:29 +0100 [thread overview]
Message-ID: <20220224103030.2040048-1-michael@walle.cc> (raw)
Use the power signal names as given in the schematics of the reference
board.
Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v1:
- swap buck1 and buck2
arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index b4225cfcb6d9..2b685c0c7eeb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -41,7 +41,7 @@ pmic: pmic@25 {
regulators {
buck1: BUCK1{
- regulator-name = "BUCK1";
+ regulator-name = "VDD_SOC";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@@ -50,7 +50,7 @@ buck1: BUCK1{
};
buck2: BUCK2 {
- regulator-name = "BUCK2";
+ regulator-name = "VDD_ARM_0V9";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@@ -61,7 +61,7 @@ buck2: BUCK2 {
};
buck4: BUCK4{
- regulator-name = "BUCK4";
+ regulator-name = "VDD_3V3";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -69,7 +69,7 @@ buck4: BUCK4{
};
buck5: BUCK5{
- regulator-name = "BUCK5";
+ regulator-name = "VDD_1V8";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -77,7 +77,7 @@ buck5: BUCK5{
};
buck6: BUCK6 {
- regulator-name = "BUCK6";
+ regulator-name = "NVCC_DRAM_1V1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -85,7 +85,7 @@ buck6: BUCK6 {
};
ldo1: LDO1 {
- regulator-name = "LDO1";
+ regulator-name = "NVCC_SNVS_1V8";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -93,7 +93,7 @@ ldo1: LDO1 {
};
ldo2: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
@@ -101,7 +101,7 @@ ldo2: LDO2 {
};
ldo3: LDO3 {
- regulator-name = "LDO3";
+ regulator-name = "VDDA_1V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -109,7 +109,7 @@ ldo3: LDO3 {
};
ldo4: LDO4 {
- regulator-name = "LDO4";
+ regulator-name = "VDD_PHY_1V2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -117,7 +117,7 @@ ldo4: LDO4 {
};
ldo5: LDO5 {
- regulator-name = "LDO5";
+ regulator-name = "NVCC_SD2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
--
2.30.2
next reply other threads:[~2022-02-24 10:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 10:30 Michael Walle [this message]
2022-02-24 10:30 ` [PATCH v2 2/2] arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC Michael Walle
2022-02-24 12:09 ` Heiko Thiery
2022-02-24 12:10 ` [PATCH v2 1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs Heiko Thiery
2022-02-26 12:58 ` Fabio Estevam
2022-03-14 7:30 ` Michael Walle
2022-04-06 13:20 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220224103030.2040048-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=heiko.thiery@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).