[PATCH 2/2] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

Since a few boards based on QCoM qmp phy use the
'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
describe the ufs phy nodes, add them to the dt-bindings doc as well.

This fixes the following '$ make dtbs_check' warning(s):

sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
  'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
   the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 746a929c63bb..a481442c897a 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -92,6 +92,14 @@ properties:
     minItems: 1
     maxItems: 3
 
+  vdda-max-microamp:
+    description:
+      Specifies max. load that can be drawn from phy supply.
+
+  vdda-pll-max-microamp:
+    description:
+      Specifies max. load that can be drawn from pll supply.
+
   vdda-phy-supply:
     description:
       Phandle to a regulator supply to PHY core block.
-- 
2.35.1