From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, abel.vesa@nxp.com
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 2/3] clk: imx8mn: remove SYS PLL 1/2 clock gates
Date: Fri, 25 Feb 2022 16:17:32 +0800 [thread overview]
Message-ID: <20220225081733.2294166-3-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20220225081733.2294166-1-peng.fan@oss.nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/clk/imx/clk-imx8mn.c | 50 ++++++++++++------------------------
1 file changed, 16 insertions(+), 34 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 021355a24708..92fcbab4f5be 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -364,45 +364,27 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
hws[IMX8MN_SYS_PLL3_OUT] = imx_clk_hw_gate("sys_pll3_out", "sys_pll3_bypass", base + 0x114, 11);
/* SYS PLL1 fixed output */
- hws[IMX8MN_SYS_PLL1_40M_CG] = imx_clk_hw_gate("sys_pll1_40m_cg", "sys_pll1", base + 0x94, 27);
- hws[IMX8MN_SYS_PLL1_80M_CG] = imx_clk_hw_gate("sys_pll1_80m_cg", "sys_pll1", base + 0x94, 25);
- hws[IMX8MN_SYS_PLL1_100M_CG] = imx_clk_hw_gate("sys_pll1_100m_cg", "sys_pll1", base + 0x94, 23);
- hws[IMX8MN_SYS_PLL1_133M_CG] = imx_clk_hw_gate("sys_pll1_133m_cg", "sys_pll1", base + 0x94, 21);
- hws[IMX8MN_SYS_PLL1_160M_CG] = imx_clk_hw_gate("sys_pll1_160m_cg", "sys_pll1", base + 0x94, 19);
- hws[IMX8MN_SYS_PLL1_200M_CG] = imx_clk_hw_gate("sys_pll1_200m_cg", "sys_pll1", base + 0x94, 17);
- hws[IMX8MN_SYS_PLL1_266M_CG] = imx_clk_hw_gate("sys_pll1_266m_cg", "sys_pll1", base + 0x94, 15);
- hws[IMX8MN_SYS_PLL1_400M_CG] = imx_clk_hw_gate("sys_pll1_400m_cg", "sys_pll1", base + 0x94, 13);
hws[IMX8MN_SYS_PLL1_OUT] = imx_clk_hw_gate("sys_pll1_out", "sys_pll1", base + 0x94, 11);
-
- hws[IMX8MN_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_40m_cg", 1, 20);
- hws[IMX8MN_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_80m_cg", 1, 10);
- hws[IMX8MN_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_100m_cg", 1, 8);
- hws[IMX8MN_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_133m_cg", 1, 6);
- hws[IMX8MN_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_160m_cg", 1, 5);
- hws[IMX8MN_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_200m_cg", 1, 4);
- hws[IMX8MN_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_266m_cg", 1, 3);
- hws[IMX8MN_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_400m_cg", 1, 2);
+ hws[IMX8MN_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_out", 1, 20);
+ hws[IMX8MN_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_out", 1, 10);
+ hws[IMX8MN_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_out", 1, 8);
+ hws[IMX8MN_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_out", 1, 6);
+ hws[IMX8MN_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_out", 1, 5);
+ hws[IMX8MN_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_out", 1, 4);
+ hws[IMX8MN_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_out", 1, 3);
+ hws[IMX8MN_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_out", 1, 2);
hws[IMX8MN_SYS_PLL1_800M] = imx_clk_hw_fixed_factor("sys_pll1_800m", "sys_pll1_out", 1, 1);
/* SYS PLL2 fixed output */
- hws[IMX8MN_SYS_PLL2_50M_CG] = imx_clk_hw_gate("sys_pll2_50m_cg", "sys_pll2", base + 0x104, 27);
- hws[IMX8MN_SYS_PLL2_100M_CG] = imx_clk_hw_gate("sys_pll2_100m_cg", "sys_pll2", base + 0x104, 25);
- hws[IMX8MN_SYS_PLL2_125M_CG] = imx_clk_hw_gate("sys_pll2_125m_cg", "sys_pll2", base + 0x104, 23);
- hws[IMX8MN_SYS_PLL2_166M_CG] = imx_clk_hw_gate("sys_pll2_166m_cg", "sys_pll2", base + 0x104, 21);
- hws[IMX8MN_SYS_PLL2_200M_CG] = imx_clk_hw_gate("sys_pll2_200m_cg", "sys_pll2", base + 0x104, 19);
- hws[IMX8MN_SYS_PLL2_250M_CG] = imx_clk_hw_gate("sys_pll2_250m_cg", "sys_pll2", base + 0x104, 17);
- hws[IMX8MN_SYS_PLL2_333M_CG] = imx_clk_hw_gate("sys_pll2_333m_cg", "sys_pll2", base + 0x104, 15);
- hws[IMX8MN_SYS_PLL2_500M_CG] = imx_clk_hw_gate("sys_pll2_500m_cg", "sys_pll2", base + 0x104, 13);
hws[IMX8MN_SYS_PLL2_OUT] = imx_clk_hw_gate("sys_pll2_out", "sys_pll2", base + 0x104, 11);
-
- hws[IMX8MN_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_50m_cg", 1, 20);
- hws[IMX8MN_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_100m_cg", 1, 10);
- hws[IMX8MN_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_125m_cg", 1, 8);
- hws[IMX8MN_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_166m_cg", 1, 6);
- hws[IMX8MN_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_200m_cg", 1, 5);
- hws[IMX8MN_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_250m_cg", 1, 4);
- hws[IMX8MN_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_333m_cg", 1, 3);
- hws[IMX8MN_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
+ hws[IMX8MN_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_out", 1, 20);
+ hws[IMX8MN_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_out", 1, 10);
+ hws[IMX8MN_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_out", 1, 8);
+ hws[IMX8MN_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_out", 1, 6);
+ hws[IMX8MN_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_out", 1, 5);
+ hws[IMX8MN_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_out", 1, 4);
+ hws[IMX8MN_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_out", 1, 3);
+ hws[IMX8MN_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2);
hws[IMX8MN_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
hws[IMX8MN_CLK_CLKOUT1_SEL] = imx_clk_hw_mux2("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
--
2.25.1
next prev parent reply other threads:[~2022-02-25 8:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 8:17 [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Peng Fan (OSS)
2022-02-25 8:17 ` [PATCH 1/3] clk: imx8mm: remove SYS PLL 1/2 clock gates Peng Fan (OSS)
2022-02-25 8:17 ` Peng Fan (OSS) [this message]
2022-02-25 8:17 ` [PATCH 3/3] clk: imx8mp: " Peng Fan (OSS)
2022-02-25 14:35 ` Abel Vesa
2022-02-28 0:39 ` Peng Fan
2022-02-28 12:23 ` Abel Vesa
2022-02-28 12:23 ` [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Abel Vesa
2022-03-04 8:50 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220225081733.2294166-3-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=abel.vesa@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox