From: Stanislav Jakubek <stano.jakubek@gmail.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-unisoc@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: timer: Convert rda,8810pl-timer to YAML
Date: Fri, 25 Feb 2022 18:37:34 +0100 [thread overview]
Message-ID: <20220225173734.GA7573@standask-GA-A55M-S2HP> (raw)
Convert RDA Micro Timer bindings to DT schema format.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
.../bindings/timer/rda,8810pl-timer.txt | 20 --------
.../bindings/timer/rda,8810pl-timer.yaml | 47 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 48 insertions(+), 21 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
deleted file mode 100644
index 4db542c9a0fd..000000000000
--- a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-RDA Micro RDA8810PL Timer
-
-Required properties:
-- compatible : "rda,8810pl-timer"
-- reg : Offset and length of the register set for the device.
-- interrupts : Should contain two interrupts.
-- interrupt-names : Should be "hwtimer", "ostimer".
-
-Example:
-
- apb@20900000 {
- compatible = "simple-bus";
- ...
- timer@10000 {
- compatible = "rda,8810pl-timer";
- reg = <0x10000 0x1000>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
- <17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hwtimer", "ostimer";
- };
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
new file mode 100644
index 000000000000..f9043a4488d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL Timer
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ compatible:
+ const: rda,8810pl-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: hwtimer
+ - const: ostimer
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@20910000 {
+ compatible = "rda,8810pl-timer";
+ reg = <0x20910000 0x1000>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+ <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hwtimer", "ostimer";
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 6d5c2c035f82..cbf91f0ecbfb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2563,7 +2563,7 @@ F: Documentation/devicetree/bindings/arm/rda.yaml
F: Documentation/devicetree/bindings/gpio/gpio-rda.yaml
F: Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
F: Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
-F: Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+F: Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
F: arch/arm/boot/dts/rda8810pl-*
F: drivers/clocksource/timer-rda.c
F: drivers/gpio/gpio-rda.c
--
2.25.1
next reply other threads:[~2022-02-25 17:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 17:37 Stanislav Jakubek [this message]
2022-02-27 10:08 ` [PATCH] dt-bindings: timer: Convert rda,8810pl-timer to YAML Krzysztof Kozlowski
2022-02-28 8:37 ` Manivannan Sadhasivam
2022-03-15 14:01 ` Stanislav Jakubek
2022-03-15 18:26 ` Krzysztof Kozlowski
2022-03-15 19:02 ` Daniel Lezcano
2022-03-16 8:25 ` Krzysztof Kozlowski
2022-03-16 8:30 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220225173734.GA7573@standask-GA-A55M-S2HP \
--to=stano.jakubek@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-unisoc@lists.infradead.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).