[PATCH v1] arm64: dts: rockchip: Add sata2 node to rk356x

[Frank Wunderlich <linux@fw-web.de>]

From: Frank Wunderlich <frank-w@public-files.de>

RK356x supports up to 3 sata controllers which were compatible with the
existing snps,dwc-ahci binding.

My board has only sata2 connected to combphy2 so only add this one.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 7cdef800cb3c..7b6c8a0c8b84 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -230,6 +230,21 @@ scmi_shmem: sram@0 {
 		};
 	};
 
+	sata2: sata@fc800000 {
+		compatible = "snps,dwc-ahci";
+		reg = <0 0xfc800000 0 0x1000>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
+			 <&cru CLK_SATA2_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		phys = <&combphy2 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@fd400000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
-- 
2.25.1