Re: [PATCH v2 2/8] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties

[Shawn Guo <shawn.guo@linaro.org>]

On Mon, Feb 28, 2022 at 06:00:13PM +0530, Bhupesh Sharma wrote:
> Since a few boards based on QCoM qmp phy use the
> 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> describe the ufs phy nodes, add them to the dt-bindings doc as well.

Does qmp-phy driver actually use them?

Shawn

> 
> This fixes the following '$ make dtbs_check' warning(s):
> 
> sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
>   'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
>    the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 48cd6b6171a1..70e7cd75e173 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -87,6 +87,14 @@ properties:
>      minItems: 1
>      maxItems: 3
>  
> +  vdda-max-microamp:
> +    description:
> +      Specifies max. load that can be drawn from phy supply.
> +
> +  vdda-pll-max-microamp:
> +    description:
> +      Specifies max. load that can be drawn from pll supply.
> +
>    vdda-phy-supply:
>      description:
>        Phandle to a regulator supply to PHY core block.
> -- 
> 2.35.1
>