[PATCH v3 5/7] PCI: qcom: Add SM8150 SoC support

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on
SM8250. Hence the support is added reusing the members of ops_1_9_0.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index c19cd506ed3f..564e2f10ea65 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1511,6 +1511,13 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
 	.ops = &ops_2_7_0,
 };
 
+static const struct qcom_pcie_cfg sm8150_cfg = {
+	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
+	 * 1.9.0, so reuse the same.
+	 */
+	.ops = &ops_1_9_0,
+};
+
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
 };
@@ -1626,6 +1633,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
 	{ .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
 	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
+	{ .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg },
 	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
 	{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
 	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
-- 
2.35.1