From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 68830C433F5 for ; Fri, 4 Mar 2022 08:08:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229884AbiCDIJ3 (ORCPT ); Fri, 4 Mar 2022 03:09:29 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37372 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229572AbiCDIJ3 (ORCPT ); Fri, 4 Mar 2022 03:09:29 -0500 Received: from lelv0143.ext.ti.com (lelv0143.ext.ti.com [198.47.23.248]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1671FB3E70 for ; Fri, 4 Mar 2022 00:08:41 -0800 (PST) Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 22488UUI096164; Fri, 4 Mar 2022 02:08:30 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1646381310; bh=/O+lrf4AlV1UtwTzJ0BR0w/gXnMIvc7mBtFuPf54foE=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=deUCVDQRiFg9Oy/9qUJCaICqOSGZYmSQZmfXZCPSktprjvDsw4OZh8e1TTD7ZOTn3 iTEoeWpW4SyAQ4YJ4zH1l1eoMNr4D5MUUxqmwGTBzmNZKOG6vusuH4MSyOjLHD4q1F qGPBNMbBvEWaAkK5ckR4rLynJgYzhSKoon2QZXno= Received: from DFLE114.ent.ti.com (dfle114.ent.ti.com [10.64.6.35]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 22488Uaa005002 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 4 Mar 2022 02:08:30 -0600 Received: from DFLE112.ent.ti.com (10.64.6.33) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2308.14; Fri, 4 Mar 2022 02:08:30 -0600 Received: from lelv0327.itg.ti.com (10.180.67.183) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2308.14 via Frontend Transport; Fri, 4 Mar 2022 02:08:30 -0600 Received: from localhost.localdomain (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 22488OYs096710; Fri, 4 Mar 2022 02:08:25 -0600 From: Georgi Vlaev To: , CC: , , , , , , Georgi Vlaev Subject: [PATCH v2] dt-bindings: regulator: Convert TPS62360 binding to json-schema Date: Fri, 4 Mar 2022 10:08:11 +0200 Message-ID: <20220304080811.45132-1-g-vlaev@ti.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <54caddff-a944-93c2-aaed-ffe80e83018e@canonical.com> References: <54caddff-a944-93c2-aaed-ffe80e83018e@canonical.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the TPS62360 regulator binding to DT schema format using json-schema. Signed-off-by: Georgi Vlaev --- V1 -> V2: Make the example indentation consistent. .../bindings/regulator/ti,tps62360.yaml | 99 +++++++++++++++++++ .../bindings/regulator/tps62360-regulator.txt | 44 --------- 2 files changed, 99 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62360.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/tps62360-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml new file mode 100644 index 000000000000..525e9a46ce1b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TPS6236x Voltage Regulators + +maintainers: + - Laxman Dewangan + +description: | + The TPS6236x are a family of step down dc-dc converter with + an input voltage range of 2.5V to 5.5V. The devices provide + up to 3A peak load current, and an output voltage range of + 0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63). + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps62360 + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + enum: + - ti,tps62360 + - ti,tps62361 + - ti,tps62362 + - ti,tps62363 + + reg: + maxItems: 1 + + ti,vsel0-gpio: + description: | + GPIO for controlling VSEL0 line. If this property + is missing, then assume that there is no GPIO for + VSEL0 control. + maxItems: 1 + + ti,vsel1-gpio: + description: | + GPIO for controlling VSEL1 line. If this property + is missing, then assume that there is no GPIO for + VSEL1 control. + maxItems: 1 + + ti,enable-vout-discharge: + description: Enable output discharge. + type: boolean + + ti,enable-pull-down: + description: Enable pull down. + type: boolean + + ti,vsel0-state-high: + description: | + Initial state of VSEL0 input is high. If this property + is missing, then assume the state as low. + type: boolean + + ti,vsel1-state-high: + description: | + Initial state of VSEL1 input is high. If this property + is missing, then assume the state as low. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-force-pwm; + ti,enable-vout-discharge; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt deleted file mode 100644 index 1b20c3dbcdb8..000000000000 --- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt +++ /dev/null @@ -1,44 +0,0 @@ -TPS62360 Voltage regulators - -Required properties: -- compatible: Must be one of the following. - "ti,tps62360" - "ti,tps62361", - "ti,tps62362", - "ti,tps62363", -- reg: I2C slave address - -Optional properties: -- ti,enable-vout-discharge: Enable output discharge. This is boolean value. -- ti,enable-pull-down: Enable pull down. This is boolean value. -- ti,vsel0-gpio: GPIO for controlling VSEL0 line. - If this property is missing, then assume that there is no GPIO - for vsel0 control. -- ti,vsel1-gpio: Gpio for controlling VSEL1 line. - If this property is missing, then assume that there is no GPIO - for vsel1 control. -- ti,vsel0-state-high: Initial state of vsel0 input is high. - If this property is missing, then assume the state as low (0). -- ti,vsel1-state-high: Initial state of vsel1 input is high. - If this property is missing, then assume the state as low (0). - -Any property defined as part of the core regulator binding, defined in -regulator.txt, can also be used. - -Example: - - abc: tps62360 { - compatible = "ti,tps62361"; - reg = <0x60>; - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on - ti,vsel0-gpio = <&gpio1 16 0>; - ti,vsel1-gpio = <&gpio1 17 0>; - ti,vsel0-state-high; - ti,vsel1-state-high; - ti,enable-pull-down; - ti,enable-force-pwm; - ti,enable-vout-discharge; - }; -- 2.30.2