Re: [PATCH 11/16] clk: qcom: krait-cc: force sec_mux to QSB

[Stephen Boyd <sboyd@kernel.org>]

Quoting Ansuel Smith (2022-03-13 12:04:14)
> Now that we have converted every driver to parent_data, it was
> notice that the bootloader can't really leave the system in a
> strange state where l2 or the cpu0/1 can be sourced in a number of ways
> for example cpu1 sourcing out of qsb, l2 sourcing out of pxo.
> To correctly reset the mux and the HFPLL force the sec_mux to QSB.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/clk/qcom/krait-cc.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
> index 6530f10a546f..1bdc89c097e6 100644
> --- a/drivers/clk/qcom/krait-cc.c
> +++ b/drivers/clk/qcom/krait-cc.c
> @@ -15,6 +15,8 @@
>  
>  #include "clk-krait.h"
>  
> +#define QSB_RATE       1
> +
>  static unsigned int sec_mux_map[] = {
>         2,
>         0,
> @@ -178,6 +180,12 @@ krait_add_sec_mux(struct device *dev, struct clk *qsb, int id,
>         if (ret)
>                 clk = ERR_PTR(ret);
>  
> +       /* Force the sec_mux to be set to QSB rate.

The comment start should be on a line alone

	/*
	 * Force the ...

> +        * This is needed to correctly set the parents and
> +        * to later reset mux and HFPLL to a known freq.
> +        */
> +       clk_set_rate(clk, QSB_RATE);
> +
>  err_clk:
>         if (unique_aux)
>                 kfree(parent_name);