[PATCH v5 0/3] Ingenic DRM bridge_atomic_enable proposal

[Christophe Branchereau <cbranchereau@gmail.com>]

Hello,

v5 :

- this set doesn't include the nv3052c bindings doc anymore,
  as it's already applied

- nv3052c panel driver : removed empty lines, proceed to turn it off
  even is sleeping in fails instead of stopping there

- abt panel : switched to REGCACHE_FLAT so we can disable sleep mode
  in .enable with regmap_set_bits() instead of doing it at init time

- ingenic-drm-drv : added ingenic_drm_bridge_atomic_disable to balance
  out ingenic_drm_bridge_atomic_enable

Tested working on the rg350m and rg280m

Christophe Branchereau (3):
  drm/ingenic : add ingenic_drm_bridge_atomic_enable and disable
  drm/panel: Add panel driver for NewVision NV3052C based LCDs
  drm/panel : innolux-ej030na and abt-y030xx067a : add .enable and
    .disable

 drivers/gpu/drm/ingenic/ingenic-drm-drv.c     |  34 +-
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-abt-y030xx067a.c  |  31 +-
 drivers/gpu/drm/panel/panel-innolux-ej030na.c |  31 +-
 .../gpu/drm/panel/panel-newvision-nv3052c.c   | 484 ++++++++++++++++++
 6 files changed, 572 insertions(+), 18 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3052c.c

-- 
2.35.1