From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, krzk+dt@kernel.org, davem@davemloft.net,
kuba@kernel.org, pabeni@redhat.com, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/3] ARM: dts: rockchip: restyle emac nodes
Date: Thu, 31 Mar 2022 18:14:59 +0200 [thread overview]
Message-ID: <20220331161459.16499-3-jbx6244@gmail.com> (raw)
In-Reply-To: <20220331161459.16499-1-jbx6244@gmail.com>
The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm/boot/dts/rk3036-evb.dts | 16 ++++++++++------
arch/arm/boot/dts/rk3036-kylin.dts | 16 ++++++++++------
arch/arm/boot/dts/rk3036.dtsi | 2 --
arch/arm/boot/dts/rk3066a-marsboard.dts | 19 +++++++++++--------
arch/arm/boot/dts/rk3066a-rayeager.dts | 15 ++++++++++-----
arch/arm/boot/dts/rk3188-radxarock.dts | 19 +++++++++++--------
arch/arm/boot/dts/rk3xxx.dtsi | 2 --
7 files changed, 52 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624e..095e0821a 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -15,16 +15,20 @@
};
&emac {
+ phy-handle = <&phy0>;
+ phy-reset-duration = <10>; /* millisecond */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
- phy = <&phy0>;
- phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
- phy-reset-duration = <10>; /* millisecond */
-
status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index e817eba8c..24c70e925 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -80,16 +80,20 @@
};
&emac {
+ phy-handle = <&phy0>;
+ phy-reset-duration = <10>; /* millisecond */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
- phy = <&phy0>;
- phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
- phy-reset-duration = <10>; /* millisecond */
-
status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index e240b89b0..78686fc72 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -228,8 +228,6 @@
compatible = "rockchip,rk3036-emac";
reg = <0x10200000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
rockchip,grf = <&grf>;
clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
clock-names = "hclk", "macref", "macclk";
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index a66d915aa..e70ba3ccf 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -150,18 +150,21 @@
#include "tps65910.dtsi"
&emac {
- status = "okay";
-
- phy = <&phy0>;
+ phy-handle = <&phy0>;
phy-supply = <&vcc_rmii>;
-
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59ae..600ada0d8 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -142,15 +142,20 @@
};
&emac {
+ phy-handle = <&phy0>;
+ phy-supply = <&vcc_rmii>;
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
- phy = <&phy0>;
- phy-supply = <&vcc_rmii>;
status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
- reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f4..e5ed0642d 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -126,18 +126,21 @@
};
&emac {
- status = "okay";
-
+ phy-handle = <&phy0>;
+ phy-supply = <&vcc_rmii>;
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+ status = "okay";
- phy = <&phy0>;
- phy-supply = <&vcc_rmii>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
- interrupt-parent = <&gpio3>;
- interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0..bf285091a 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -186,8 +186,6 @@
compatible = "snps,arc-emac";
reg = <0x10204000 0x3c>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
rockchip,grf = <&grf>;
--
2.20.1
next prev parent reply other threads:[~2022-03-31 16:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-31 16:14 [PATCH v1 1/3] dt-bindings: net: convert emac_rockchip.txt to YAML Johan Jonker
2022-03-31 16:14 ` [PATCH v1 2/3] ARM: dts: rockchip: fix rk3036 emac node compatible string Johan Jonker
2022-03-31 16:14 ` Johan Jonker [this message]
2022-03-31 17:08 ` [PATCH v1 1/3] dt-bindings: net: convert emac_rockchip.txt to YAML Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220331161459.16499-3-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).