[PATCH AUTOSEL 5.17 028/149] powerpc: dts: t104xrdb: fix phy type for FMAN 4/5

[PATCH AUTOSEL 5.17 028/149] powerpc: dts: t104xrdb: fix phy type for FMAN 4/5

[Sasha Levin]

From: Maxim Kiselev <bigunclemax@gmail.com>

[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]

T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.

Changing the phy-connection-type property to `rgmii-id`
will fix this issue.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 099a598c74c0..bfe1ed5be337 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -139,12 +139,12 @@ pca9546@77 {
 		fman@400000 {
 			ethernet@e6000 {
 				phy-handle = <&phy_rgmii_0>;
-				phy-connection-type = "rgmii";
+				phy-connection-type = "rgmii-id";
 			};
 
 			ethernet@e8000 {
 				phy-handle = <&phy_rgmii_1>;
-				phy-connection-type = "rgmii";
+				phy-connection-type = "rgmii-id";
 			};
 
 			mdio0: mdio@fc000 {
-- 
2.34.1

[PATCH AUTOSEL 5.17 139/149] xtensa: fix DTC warning unit_address_format

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]

DTC issues the following warnings when building xtfpga device trees:

 /soc/flash@00000000/partition@0x0: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x"
 /soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"

Drop leading 0x from flash partition unit names.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi | 8 ++++----
 arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi  | 8 ++++----
 arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi   | 4 ++--
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi
index 9bf8bad1dd18..c33932568aa7 100644
--- a/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi
@@ -8,19 +8,19 @@ flash: flash@00000000 {
 			reg = <0x00000000 0x08000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			partition@0x0 {
+			partition@0 {
 				label = "data";
 				reg = <0x00000000 0x06000000>;
 			};
-			partition@0x6000000 {
+			partition@6000000 {
 				label = "boot loader area";
 				reg = <0x06000000 0x00800000>;
 			};
-			partition@0x6800000 {
+			partition@6800000 {
 				label = "kernel image";
 				reg = <0x06800000 0x017e0000>;
 			};
-			partition@0x7fe0000 {
+			partition@7fe0000 {
 				label = "boot environment";
 				reg = <0x07fe0000 0x00020000>;
 			};
diff --git a/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi
index 40c2f81f7cb6..7bde2ab2d6fb 100644
--- a/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi
@@ -8,19 +8,19 @@ flash: flash@08000000 {
 			reg = <0x08000000 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			partition@0x0 {
+			partition@0 {
 				label = "boot loader area";
 				reg = <0x00000000 0x00400000>;
 			};
-			partition@0x400000 {
+			partition@400000 {
 				label = "kernel image";
 				reg = <0x00400000 0x00600000>;
 			};
-			partition@0xa00000 {
+			partition@a00000 {
 				label = "data";
 				reg = <0x00a00000 0x005e0000>;
 			};
-			partition@0xfe0000 {
+			partition@fe0000 {
 				label = "boot environment";
 				reg = <0x00fe0000 0x00020000>;
 			};
diff --git a/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi
index fb8d3a9f33c2..0655b868749a 100644
--- a/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi
@@ -8,11 +8,11 @@ flash: flash@08000000 {
 			reg = <0x08000000 0x00400000>;
 			bank-width = <2>;
 			device-width = <2>;
-			partition@0x0 {
+			partition@0 {
 				label = "boot loader area";
 				reg = <0x00000000 0x003f0000>;
 			};
-			partition@0x3f0000 {
+			partition@3f0000 {
 				label = "boot environment";
 				reg = <0x003f0000 0x00010000>;
 			};
-- 
2.34.1

[PATCH AUTOSEL 5.17 141/149] MIPS: ingenic: correct unit node address

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62 ]

Unit node addresses should not have leading 0x:

  Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 3f9ea47a10cd..b998301f179c 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -510,7 +510,7 @@ efuse: efuse@d0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			eth0_addr: eth-mac-addr@0x22 {
+			eth0_addr: eth-mac-addr@22 {
 				reg = <0x22 0x6>;
 			};
 		};
-- 
2.34.1