[PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Kuldeep Singh]

GENI(generic interface) based Qualcomm Universal Peripheral controller
can support multiple serial interfaces like spi,uart and i2c.

Unlike other i2c controllers, QUP i2c bindings are present in parent
schema. Move it out from parent to an individual binding and let parent
refer to child schema later on.

Please note, current schema isn't complete as it misses out few
properties and thus, add these missing properties along the process.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..01a02e680ea3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-i2c
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz
+    default: 100000
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
-- 
2.25.1

Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> GENI(generic interface) based Qualcomm Universal Peripheral controller
> can support multiple serial interfaces like spi,uart and i2c.
> 
> Unlike other i2c controllers, QUP i2c bindings are present in parent
> schema. Move it out from parent to an individual binding and let parent
> refer to child schema later on.
> 
> Please note, current schema isn't complete as it misses out few
> properties and thus, add these missing properties along the process.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> new file mode 100644
> index 000000000000..01a02e680ea3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Geni based QUP I2C Controller
> +
> +maintainers:
> +  - Andy Gross <agross@kernel.org>
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +allOf:
> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,geni-i2c

Just const, no enum. There are no other flavors of this (unless you
think there are?).

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: se
> +
> +  clock-frequency:
> +    description: Desired I2C bus clock frequency in Hz
> +    default: 100000
> +
> +  interconnects:
> +    maxItems: 3
> +
> +  interconnect-names:
> +    items:
> +      - const: qup-core
> +      - const: qup-config
> +      - const: qup-memory
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  required-opps:
> +    maxItems: 1

I have doubts this is correct property. Usually it is part of the
opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
know how it is supposed to work?


Best regards,
Krzysztof

Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 02:29:59PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > GENI(generic interface) based Qualcomm Universal Peripheral controller
> > can support multiple serial interfaces like spi,uart and i2c.
> > 
> > Unlike other i2c controllers, QUP i2c bindings are present in parent
> > schema. Move it out from parent to an individual binding and let parent
> > refer to child schema later on.
> > 
> > Please note, current schema isn't complete as it misses out few
> > properties and thus, add these missing properties along the process.
> > 
> > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> > ---
> >  .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > new file mode 100644
> > index 000000000000..01a02e680ea3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm Geni based QUP I2C Controller
> > +
> > +maintainers:
> > +  - Andy Gross <agross@kernel.org>
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +allOf:
> > +  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,geni-i2c
> 
> Just const, no enum. There are no other flavors of this (unless you
> think there are?).

There are no other users. Will change it to const.

> 
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: se
> > +
> > +  clock-frequency:
> > +    description: Desired I2C bus clock frequency in Hz
> > +    default: 100000
> > +
> > +  interconnects:
> > +    maxItems: 3
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: qup-core
> > +      - const: qup-config
> > +      - const: qup-memory
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  required-opps:
> > +    maxItems: 1
> 
> I have doubts this is correct property. Usually it is part of the
> opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
> know how it is supposed to work?

Not sure how exactly it works. I took reference from
Documentation/devicetree/bindings/clock/qcom,videocc.yaml on how to add
required-opps.

-Kuldeep

Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Krzysztof Kozlowski]

On 02/04/2022 21:44, Kuldeep Singh wrote:
> On Sat, Apr 02, 2022 at 02:29:59PM +0200, Krzysztof Kozlowski wrote:
>> On 02/04/2022 07:12, Kuldeep Singh wrote:
>>> GENI(generic interface) based Qualcomm Universal Peripheral controller
>>> can support multiple serial interfaces like spi,uart and i2c.
>>>
	
>>> +
>>> +  power-domains:
>>> +    maxItems: 1
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  required-opps:
>>> +    maxItems: 1
>>
>> I have doubts this is correct property. Usually it is part of the
>> opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
>> know how it is supposed to work?
> 
> Not sure how exactly it works. I took reference from
> Documentation/devicetree/bindings/clock/qcom,videocc.yaml on how to add
> required-opps.
>

I see now that power domains consumer bindings also mention it:
Documentation/devicetree/bindings/power/power_domain.txt
and it might be actually used via __genpd_dev_pm_attach().

Let's keep it then.

Best regards,
Krzysztof

Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> GENI(generic interface) based Qualcomm Universal Peripheral controller
> can support multiple serial interfaces like spi,uart and i2c.
> 

Few more comments.

(...)

> +
> +  clock-frequency:
> +    description: Desired I2C bus clock frequency in Hz

Skip description, it's common for I2C controllers.

> +    default: 100000
> +
> +  interconnects:
> +    maxItems: 3
> +
> +  interconnect-names:
> +    items:
> +      - const: qup-core
> +      - const: qup-config
> +      - const: qup-memory
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  required-opps:
> +    maxItems: 1
> +
> +  dmas:
> +    maxItems: 2
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +  pinctrl-0: true
> +  pinctrl-1: true
> +
> +  pinctrl-names:
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0

These are not needed, they come from schema.

Best regards,
Krzysztof

Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 08:24:25PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > GENI(generic interface) based Qualcomm Universal Peripheral controller
> > can support multiple serial interfaces like spi,uart and i2c.
> > 
> 
> Few more comments.
> 
> (...)
> 
> > +
> > +  clock-frequency:
> > +    description: Desired I2C bus clock frequency in Hz
> 
> Skip description, it's common for I2C controllers.

ok.

> 
> > +    default: 100000
> > +
> > +  interconnects:
> > +    maxItems: 3
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: qup-core
> > +      - const: qup-config
> > +      - const: qup-memory
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  required-opps:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    maxItems: 2
> > +
> > +  dma-names:
> > +    items:
> > +      - const: tx
> > +      - const: rx
> > +
> > +  pinctrl-0: true
> > +  pinctrl-1: true
> > +
> > +  pinctrl-names:
> > +    minItems: 1
> > +    items:
> > +      - const: default
> > +      - const: sleep
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> 
> These are not needed, they come from schema.

Yes. I will update in v2. Thanks!

-Kuldeep

[PATCH 2/5] dt-bindings: qcom: geni-se: Update i2c schema reference

[Kuldeep Singh]

We now have geni based QUP i2c controller binding in place as
dt-bindigs/i2c/qcom,i2c-geni-qcom.yaml similar to other controllers,
update reference in parent schema and while at it, also remove
properties defined for the controller from commown wrapper.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../bindings/soc/qcom/qcom,geni-se.yaml       | 26 +------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 95fcb43675d6..e6073923e03a 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -128,31 +128,7 @@ patternProperties:
   "i2c@[0-9a-f]+$":
     type: object
     description: GENI serial engine based I2C controller.
-    $ref: /schemas/i2c/i2c-controller.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-i2c
-
-      interrupts:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-      clock-frequency:
-        description: Desired I2C bus clock frequency in Hz.
-        default: 100000
-
-    required:
-      - compatible
-      - interrupts
-      - "#address-cells"
-      - "#size-cells"
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
 
   "serial@[0-9a-f]+$":
     type: object
-- 
2.25.1

Re: [PATCH 2/5] dt-bindings: qcom: geni-se: Update i2c schema reference

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> We now have geni based QUP i2c controller binding in place as
> dt-bindigs/i2c/qcom,i2c-geni-qcom.yaml similar to other controllers,
> update reference in parent schema and while at it, also remove
> properties defined for the controller from commown wrapper.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  .../bindings/soc/qcom/qcom,geni-se.yaml       | 26 +------------------
>  1 file changed, 1 insertion(+), 25 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

[PATCH 3/5] dt-bindings: serial: Update Qualcomm geni based QUP uart bindings

[Kuldeep Singh]

Similar to i2c controller, move geni based QUP uart controller bindings
out from parent schema to an individual binding and let parent refer to
child schema later on. Uart bindings also stand incomplete right now
similar to i2c, complete it along this process.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../serial/qcom,serial-geni-qcom.yaml         | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml

diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 000000000000..717b0909280a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-uart
+      - qcom,geni-debug-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: UART core irq
+      - description: Wakeup irq (RX GPIO)
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+    serial@a88000 {
+        compatible = "qcom,geni-uart";
+        reg = <0xa88000 0x7000>;
+        interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-0 = <&qup_uart0_default>;
+        pinctrl-names = "default";
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+...
-- 
2.25.1

Re: [PATCH 3/5] dt-bindings: serial: Update Qualcomm geni based QUP uart bindings

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> Similar to i2c controller, move geni based QUP uart controller bindings

s/i2c/I2C/
s/uart/UART/

> out from parent schema to an individual binding and let parent refer to
> child schema later on. Uart bindings also stand incomplete right now

s/Uart/UART/

> similar to i2c, complete it along this process.

s/i2c/I2C/



Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH 3/5] dt-bindings: serial: Update Qualcomm geni based QUP uart bindings

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 05:37:57PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > Similar to i2c controller, move geni based QUP uart controller bindings
> 
> s/i2c/I2C/
> s/uart/UART/
> 
> > out from parent schema to an individual binding and let parent refer to
> > child schema later on. Uart bindings also stand incomplete right now
> 
> s/Uart/UART/
> 
> > similar to i2c, complete it along this process.
> 
> s/i2c/I2C/
> 
> 
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Great thanks!
Will update accordingly.

-Kuldeep

[PATCH 4/5] dt-bindings: qcom: geni-se: Update uart schema reference

[Kuldeep Singh]

We now have geni based QUP uart controller binding in place as
dt-bindings/serial/qcom,serial-geni-qcom.yaml similar to other
controllers, update reference in parent schema and while at it, also
remove properties defined for the controller from commown wrapper.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../bindings/soc/qcom/qcom,geni-se.yaml        | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index e6073923e03a..9f72c676b22c 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -133,23 +133,7 @@ patternProperties:
   "serial@[0-9a-f]+$":
     type: object
     description: GENI Serial Engine based UART Controller.
-    $ref: /schemas/serial.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-uart
-          - qcom,geni-debug-uart
-
-      interrupts:
-        minItems: 1
-        items:
-          - description: UART core irq
-          - description: Wakeup irq (RX GPIO)
-
-    required:
-      - compatible
-      - interrupts
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
 additionalProperties: false
 
-- 
2.25.1

Re: [PATCH 4/5] dt-bindings: qcom: geni-se: Update uart schema reference

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> We now have geni based QUP uart controller binding in place as

s/uart/UART/

Similar to your previous commit - this could be one, max two sentences...

> dt-bindings/serial/qcom,serial-geni-qcom.yaml similar to other
> controllers, update reference in parent schema and while at it, also
> remove properties defined for the controller from commown wrapper.

s/commown/common/

> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  .../bindings/soc/qcom/qcom,geni-se.yaml        | 18 +-----------------
>  1 file changed, 1 insertion(+), 17 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH 4/5] dt-bindings: qcom: geni-se: Update uart schema reference

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 05:39:18PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > We now have geni based QUP uart controller binding in place as
> 
> s/uart/UART/
> 
> Similar to your previous commit - this could be one, max two sentences...
> 
> > dt-bindings/serial/qcom,serial-geni-qcom.yaml similar to other
> > controllers, update reference in parent schema and while at it, also
> > remove properties defined for the controller from commown wrapper.
> 
> s/commown/common/
> 
> > 
> > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> > ---
> >  .../bindings/soc/qcom/qcom,geni-se.yaml        | 18 +-----------------
> >  1 file changed, 1 insertion(+), 17 deletions(-)
> > 
> 
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Thanks, will update.

-Kuldeep

[PATCH 5/5] dt-bindings: qcom: geni-se: Remove common controller properties

[Kuldeep Singh]

Now that Geni serial engine controllers(spi, i2c and uart) have their
own individual bindings, it's time to remove all common properties of
the controllers from parent schema.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../bindings/soc/qcom/qcom,geni-se.yaml       | 33 -------------------
 1 file changed, 33 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 9f72c676b22c..c8e1a4a87ba8 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -64,39 +64,6 @@ required:
   - ranges
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-    description: Common properties for GENI Serial Engine based I2C, SPI and
-                 UART controller.
-
-    properties:
-      reg:
-        description: GENI Serial Engine register address and length.
-        maxItems: 1
-
-      clock-names:
-        const: se
-
-      clocks:
-        description: Serial engine core clock needed by the device.
-        maxItems: 1
-
-      interconnects:
-        minItems: 2
-        maxItems: 3
-
-      interconnect-names:
-        minItems: 2
-        items:
-          - const: qup-core
-          - const: qup-config
-          - const: qup-memory
-
-    required:
-      - reg
-      - clock-names
-      - clocks
-
   "spi@[0-9a-f]+$":
     type: object
     description: GENI serial engine based SPI controller. SPI in master mode
-- 
2.25.1

Re: [PATCH 5/5] dt-bindings: qcom: geni-se: Remove common controller properties

[Krzysztof Kozlowski]

On 02/04/2022 07:12, Kuldeep Singh wrote:
> Now that Geni serial engine controllers(spi, i2c and uart) have their
> own individual bindings, it's time to remove all common properties of
> the controllers from parent schema.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  .../bindings/soc/qcom/qcom,geni-se.yaml       | 33 -------------------
>  1 file changed, 33 deletions(-)
> 

This should be squashed with your previous commit, because removal of
last direct child schema, makes the common parts obsolete. IOW, the
common parts are only because there is children are open-coded here.

Best regards,
Krzysztof

Re: [PATCH 5/5] dt-bindings: qcom: geni-se: Remove common controller properties

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 05:41:57PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > Now that Geni serial engine controllers(spi, i2c and uart) have their
> > own individual bindings, it's time to remove all common properties of
> > the controllers from parent schema.
> > 
> > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> > ---
> >  .../bindings/soc/qcom/qcom,geni-se.yaml       | 33 -------------------
> >  1 file changed, 33 deletions(-)
> > 
> 
> This should be squashed with your previous commit, because removal of
> last direct child schema, makes the common parts obsolete. IOW, the
> common parts are only because there is children are open-coded here.

Initially I thought the same, but then this patch will do more than what
commit description says, that's why I kept separate patch.

Nevermind, I will squash it with previous one.

-Kuldeep