devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Mark Brown <broonie@kernel.org>
Subject: [PATCH v2 2/2] ARM: dts: at91: Describe regulators on at91sam9g20ek
Date: Mon,  4 Apr 2022 11:28:06 +0100	[thread overview]
Message-ID: <20220404102806.581374-3-broonie@kernel.org> (raw)
In-Reply-To: <20220404102806.581374-1-broonie@kernel.org>

The at91sam9g20ek has no software controllable regulators, only some fixed
discrete regulators, but they are there and currently the wm8731 driver
does try to use them. Show the supplies in the DT and map them for the
wm8731 so things start up cleanly.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 37 +++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index ca03685f0f08..6978ccb0cb26 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -214,6 +214,7 @@ i2c-gpio-0 {
 		24c512@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
@@ -225,6 +226,11 @@ wm8731: wm8731@1b {
 			clock-names = "mclk";
 			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
@@ -260,4 +266,35 @@ sound {
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
-- 
2.30.2


  parent reply	other threads:[~2022-04-04 10:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-04 10:28 [PATCH v2 0/2] ARM: dts: at91: Fixes for AT91SAM9G20-EK DTS Mark Brown
2022-04-04 10:28 ` [PATCH v2 1/2] ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek Mark Brown
2022-04-04 10:28 ` Mark Brown [this message]
2022-04-13 16:45 ` [PATCH v2 0/2] ARM: dts: at91: Fixes for AT91SAM9G20-EK DTS Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220404102806.581374-3-broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=codrin.ciubotariu@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).