From: Rex-BC Chen <rex-bc.chen@mediatek.com>
To: <rafael@kernel.org>, <viresh.kumar@linaro.org>,
<robh+dt@kernel.org>, <krzk+dt@kernel.org>
Cc: <matthias.bgg@gmail.com>, <jia-wei.chang@mediatek.com>,
<roger.lu@mediatek.com>, <hsinyi@google.com>,
<linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>,
Rex-BC Chen <rex-bc.chen@mediatek.com>
Subject: [PATCH V2 03/15] cpufreq: mediatek: Cleanup variables and error handling in mtk_cpu_dvfs_info_init()
Date: Fri, 8 Apr 2022 12:58:56 +0800 [thread overview]
Message-ID: <20220408045908.21671-4-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20220408045908.21671-1-rex-bc.chen@mediatek.com>
From: Jia-Wei Chang <jia-wei.chang@mediatek.com>
- Remove several unnecessary varaibles in mtk_cpu_dvfs_info_init().
- Unify error message format and use dev_err_probe() if possible.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
drivers/cpufreq/mediatek-cpufreq.c | 89 ++++++++++++------------------
1 file changed, 34 insertions(+), 55 deletions(-)
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 9d7d9c8dc184..e0545aca7e41 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -300,96 +300,75 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
{
struct device *cpu_dev;
- struct regulator *proc_reg = ERR_PTR(-ENODEV);
- struct regulator *sram_reg = ERR_PTR(-ENODEV);
- struct clk *cpu_clk = ERR_PTR(-ENODEV);
- struct clk *inter_clk = ERR_PTR(-ENODEV);
struct dev_pm_opp *opp;
unsigned long rate;
int ret;
cpu_dev = get_cpu_device(cpu);
if (!cpu_dev) {
- pr_err("failed to get cpu%d device\n", cpu);
+ dev_err(cpu_dev, "failed to get cpu%d device\n", cpu);
return -ENODEV;
}
+ info->cpu_dev = cpu_dev;
- cpu_clk = clk_get(cpu_dev, "cpu");
- if (IS_ERR(cpu_clk)) {
- if (PTR_ERR(cpu_clk) == -EPROBE_DEFER)
- pr_warn("cpu clk for cpu%d not ready, retry.\n", cpu);
- else
- pr_err("failed to get cpu clk for cpu%d\n", cpu);
-
- ret = PTR_ERR(cpu_clk);
- return ret;
+ info->cpu_clk = clk_get(cpu_dev, "cpu");
+ if (IS_ERR(info->cpu_clk)) {
+ ret = PTR_ERR(info->cpu_clk);
+ return dev_err_probe(cpu_dev, ret,
+ "cpu%d: failed to get cpu clk\n", cpu);
}
- inter_clk = clk_get(cpu_dev, "intermediate");
- if (IS_ERR(inter_clk)) {
- if (PTR_ERR(inter_clk) == -EPROBE_DEFER)
- pr_warn("intermediate clk for cpu%d not ready, retry.\n",
- cpu);
- else
- pr_err("failed to get intermediate clk for cpu%d\n",
- cpu);
-
- ret = PTR_ERR(inter_clk);
+ info->inter_clk = clk_get(cpu_dev, "intermediate");
+ if (IS_ERR(info->inter_clk)) {
+ ret = PTR_ERR(info->inter_clk);
+ dev_err_probe(cpu_dev, ret,
+ "cpu%d: failed to get intermediate clk\n", cpu);
goto out_free_resources;
}
- proc_reg = regulator_get_optional(cpu_dev, "proc");
- if (IS_ERR(proc_reg)) {
- if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
- pr_warn("proc regulator for cpu%d not ready, retry.\n",
- cpu);
- else
- pr_err("failed to get proc regulator for cpu%d\n",
- cpu);
-
- ret = PTR_ERR(proc_reg);
+ info->proc_reg = regulator_get_optional(cpu_dev, "proc");
+ if (IS_ERR(info->proc_reg)) {
+ ret = PTR_ERR(info->proc_reg);
+ dev_err_probe(cpu_dev, ret,
+ "cpu%d: failed to get proc regulator\n", cpu);
goto out_free_resources;
}
/* Both presence and absence of sram regulator are valid cases. */
- sram_reg = regulator_get_exclusive(cpu_dev, "sram");
+ info->sram_reg = regulator_get_exclusive(cpu_dev, "sram");
+ if (IS_ERR(info->sram_reg))
+ info->sram_reg = NULL;
/* Get OPP-sharing information from "operating-points-v2" bindings */
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus);
if (ret) {
- pr_err("failed to get OPP-sharing information for cpu%d\n",
- cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to get OPP-sharing information\n", cpu);
goto out_free_resources;
}
ret = dev_pm_opp_of_cpumask_add_table(&info->cpus);
if (ret) {
- pr_warn("no OPP table for cpu%d\n", cpu);
+ dev_warn(cpu_dev, "cpu%d: no OPP table\n", cpu);
goto out_free_resources;
}
/* Search a safe voltage for intermediate frequency. */
- rate = clk_get_rate(inter_clk);
+ rate = clk_get_rate(info->inter_clk);
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
if (IS_ERR(opp)) {
- pr_err("failed to get intermediate opp for cpu%d\n", cpu);
+ dev_err(cpu_dev, "cpu%d: failed to get intermediate opp\n", cpu);
ret = PTR_ERR(opp);
goto out_free_opp_table;
}
info->intermediate_voltage = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);
- info->cpu_dev = cpu_dev;
- info->proc_reg = proc_reg;
- info->sram_reg = IS_ERR(sram_reg) ? NULL : sram_reg;
- info->cpu_clk = cpu_clk;
- info->inter_clk = inter_clk;
-
/*
* If SRAM regulator is present, software "voltage tracking" is needed
* for this CPU power domain.
*/
- info->need_voltage_tracking = !IS_ERR(sram_reg);
+ info->need_voltage_tracking = (info->sram_reg != NULL);
return 0;
@@ -397,14 +376,14 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
dev_pm_opp_of_cpumask_remove_table(&info->cpus);
out_free_resources:
- if (!IS_ERR(proc_reg))
- regulator_put(proc_reg);
- if (!IS_ERR(sram_reg))
- regulator_put(sram_reg);
- if (!IS_ERR(cpu_clk))
- clk_put(cpu_clk);
- if (!IS_ERR(inter_clk))
- clk_put(inter_clk);
+ if (!IS_ERR(info->proc_reg))
+ regulator_put(info->proc_reg);
+ if (!IS_ERR(info->sram_reg))
+ regulator_put(info->sram_reg);
+ if (!IS_ERR(info->cpu_clk))
+ clk_put(info->cpu_clk);
+ if (!IS_ERR(info->inter_clk))
+ clk_put(info->inter_clk);
return ret;
}
--
2.18.0
next prev parent reply other threads:[~2022-04-08 4:59 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 4:58 [PATCH V2 00/15] cpufreq: mediatek: Cleanup and support MT8183 and MT8186 Rex-BC Chen
2022-04-08 4:58 ` [PATCH V2 01/15] dt-bindings: cpufreq: mediatek: Add MediaTek CCI property Rex-BC Chen
2022-04-08 8:10 ` Krzysztof Kozlowski
2022-04-08 10:24 ` Rex-BC Chen
2022-04-08 11:49 ` Krzysztof Kozlowski
2022-04-11 6:48 ` Rex-BC Chen
2022-04-08 4:58 ` [PATCH V2 02/15] cpufreq: mediatek: Use module_init and add module_exit Rex-BC Chen
2022-04-08 13:36 ` AngeloGioacchino Del Regno
2022-04-11 3:17 ` Viresh Kumar
2022-04-08 4:58 ` Rex-BC Chen [this message]
2022-04-08 13:36 ` [PATCH V2 03/15] cpufreq: mediatek: Cleanup variables and error handling in mtk_cpu_dvfs_info_init() AngeloGioacchino Del Regno
2022-04-11 3:20 ` Viresh Kumar
2022-04-08 4:58 ` [PATCH V2 04/15] cpufreq: mediatek: Remove unused headers Rex-BC Chen
2022-04-08 13:36 ` AngeloGioacchino Del Regno
2022-04-11 3:21 ` Viresh Kumar
2022-04-08 4:58 ` [PATCH V2 05/15] cpufreq: mediatek: Enable clocks and regulators Rex-BC Chen
2022-04-08 13:36 ` AngeloGioacchino Del Regno
2022-04-11 3:22 ` Viresh Kumar
2022-04-08 4:58 ` [PATCH V2 06/15] cpufreq: mediatek: Record previous target vproc value Rex-BC Chen
2022-04-08 13:36 ` AngeloGioacchino Del Regno
2022-04-11 11:35 ` Rex-BC Chen
2022-04-11 3:26 ` Viresh Kumar
2022-04-11 11:33 ` Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 08/15] cpufreq: mediatek: Move voltage limits to platform data Rex-BC Chen
2022-04-08 13:36 ` AngeloGioacchino Del Regno
2022-04-11 11:18 ` Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 09/15] cpufreq: mediatek: Add .get function Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 10/15] cpufreq: mediatek: Make sram regulator optional Rex-BC Chen
2022-04-08 13:37 ` AngeloGioacchino Del Regno
2022-04-08 20:32 ` Kevin Hilman
2022-04-14 10:53 ` Rex-BC Chen
2022-04-14 17:20 ` Kevin Hilman
2022-04-08 4:59 ` [PATCH V2 11/15] cpufreq: mediatek: Update logic of voltage_tracking() Rex-BC Chen
2022-04-08 21:08 ` Kevin Hilman
2022-04-14 11:30 ` Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 12/15] cpufreq: mediatek: Use maximum voltage in init stage Rex-BC Chen
2022-04-08 13:37 ` AngeloGioacchino Del Regno
2022-04-12 11:24 ` Rex-BC Chen
2022-04-14 3:40 ` Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 13/15] cpufreq: mediatek: Link CCI device to CPU Rex-BC Chen
2022-04-08 13:37 ` AngeloGioacchino Del Regno
2022-04-11 11:50 ` Rex-BC Chen
2022-04-08 20:54 ` Kevin Hilman
2022-04-11 11:51 ` Rex-BC Chen
2022-04-11 12:31 ` Rex-BC Chen
2022-04-11 18:13 ` Kevin Hilman
2022-04-12 12:26 ` Rex-BC Chen
2022-04-12 18:50 ` Kevin Hilman
2022-04-13 11:32 ` Rex-BC Chen
2022-04-13 21:41 ` Kevin Hilman
2022-04-14 2:32 ` Rex-BC Chen
2022-04-14 21:48 ` Kevin Hilman
2022-04-15 2:31 ` Rex-BC Chen
2022-04-19 18:16 ` Kevin Hilman
2022-04-08 4:59 ` [PATCH V2 14/15] cpufreq: mediatek: Add support for MT8186 Rex-BC Chen
2022-04-08 13:37 ` AngeloGioacchino Del Regno
2022-04-08 21:10 ` Kevin Hilman
2022-04-11 11:14 ` Rex-BC Chen
2022-04-08 4:59 ` [PATCH V2 15/15] cpufreq: mediatek: Use device print to show logs Rex-BC Chen
2022-04-08 13:37 ` AngeloGioacchino Del Regno
2022-04-11 3:29 ` Viresh Kumar
2022-04-11 11:09 ` Rex-BC Chen
[not found] ` <20220408045908.21671-8-rex-bc.chen@mediatek.com>
2022-04-08 13:36 ` [PATCH V2 07/15] cpufreq: mediatek: Add opp notification for SVS support AngeloGioacchino Del Regno
2022-04-08 20:29 ` Kevin Hilman
[not found] ` <3b7bf25a3da6c8f780c87784c1f796bf1e464238.camel@mediatek.com>
2022-04-11 18:09 ` Kevin Hilman
[not found] ` <dfe2d3e3401a6f2a7be9db4e8a0590d3dd9a6969.camel@mediatek.com>
2022-04-12 18:04 ` Kevin Hilman
2022-04-08 21:11 ` [PATCH V2 00/15] cpufreq: mediatek: Cleanup and support MT8183 and MT8186 Kevin Hilman
2022-04-09 1:05 ` Hsin-Yi Wang
2022-04-11 11:37 ` Rex-BC Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220408045908.21671-4-rex-bc.chen@mediatek.com \
--to=rex-bc.chen@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@google.com \
--cc=jia-wei.chang@mediatek.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=roger.lu@mediatek.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).