From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Subject: [PATCH 2/3] arm64: dts: qcom: sm8450: Add thermal zones
Date: Mon, 11 Apr 2022 02:44:57 +0300 [thread overview]
Message-ID: <20220410234458.1739279-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220410234458.1739279-1-dmitry.baryshkov@linaro.org>
From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Add thermal zones handled by tsens sensors. The definitions and the trip
points were taken from the downstream dts. For the CPU core thermal
sensors, the trip points were changed to follow the example of other
Qualcomm platforms.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 843 +++++++++++++++++++++++++++
1 file changed, 843 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b695ce824722..4f3c7e7d2855 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -47,6 +48,7 @@ CPU0: cpu@0 {
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -65,6 +67,7 @@ CPU1: cpu@100 {
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -80,6 +83,7 @@ CPU2: cpu@200 {
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -95,6 +99,7 @@ CPU3: cpu@300 {
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -110,6 +115,7 @@ CPU4: cpu@400 {
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -125,6 +131,7 @@ CPU5: cpu@500 {
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -141,6 +148,7 @@ CPU6: cpu@600 {
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -156,6 +164,7 @@ CPU7: cpu@700 {
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
+ #cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -1517,6 +1526,840 @@ lpass_ag_noc: interconnect@3c40000 {
};
};
+ thermal-zones {
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss4-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu4-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu4_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu4_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu5_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu5_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu6_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu7_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-middle-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu7_middle_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_middle_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_middle_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu7_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-top-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu0_tj_cfg: tj_cfg {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpu-bottom-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu1_tj_cfg: tj_cfg {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cdsp0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_0_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cdsp1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_1_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cdsp2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_2_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ ddr_config0: ddr0-config {
+ temperature = <90000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss0_config0: mdmss0-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss0_config1: mdmss0-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss1_config0: mdmss1-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss1_config1: mdmss1-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 12>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss2_config0: mdmss2-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss2_config1: mdmss2-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 13>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss3_config0: mdmss3-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss3_config1: mdmss3-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 14>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 15>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
--
2.35.1
next prev parent reply other threads:[~2022-04-10 23:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-10 23:44 [PATCH 0/3] arm64: dts: qcom: sm8450: add thermal zones and cooling maps Dmitry Baryshkov
2022-04-10 23:44 ` [PATCH 1/3] arm64: dts: qcom: sm8450: Add thermal sensor controllers Dmitry Baryshkov
2022-04-12 19:39 ` Dmitry Baryshkov
2022-04-19 17:34 ` Bjorn Andersson
2022-04-21 14:26 ` (subset) " Bjorn Andersson
2022-04-10 23:44 ` Dmitry Baryshkov [this message]
2022-04-21 14:26 ` (subset) [PATCH 2/3] arm64: dts: qcom: sm8450: Add thermal zones Bjorn Andersson
2022-04-10 23:44 ` [PATCH 3/3] arm64: dts: qcom: sm8450: add cooling-maps to CPU trip points Dmitry Baryshkov
2022-04-19 17:16 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220410234458.1739279-3-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).