devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Aswath Govindraju <a-govindraju@ti.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>,
	<linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit
Date: Mon, 18 Apr 2022 15:50:40 +0530	[thread overview]
Message-ID: <20220418102040.4993-3-a-govindraju@ti.com> (raw)
In-Reply-To: <20220418102040.4993-1-a-govindraju@ti.com>

From: Vignesh Raghavendra <vigneshr@ti.com>

The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
 drivers/mmc/host/sdhci_am654.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index e54fe24d47e7..c36b969ed1b6 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -147,6 +147,9 @@ struct sdhci_am654_data {
 	int drv_strength;
 	int strb_sel;
 	u32 flags;
+	u32 quirks;
+
+#define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
 };
 
 struct sdhci_am654_driver_data {
@@ -369,6 +372,21 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 	}
 }
 
+void sdhci_am654_reset(struct sdhci_host *host, u8 mask)
+{
+	u8 ctrl;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_reset(host, mask);
+
+	if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_FORCE_CDTEST) {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		ctrl |= SDHCI_CTRL_CDTEST_INS | SDHCI_CTRL_CDTEST_EN;
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+}
+
 static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -500,7 +518,7 @@ static struct sdhci_ops sdhci_j721e_4bit_ops = {
 	.set_clock = sdhci_j721e_4bit_set_clock,
 	.write_b = sdhci_am654_write_b,
 	.irq = sdhci_am654_cqhci_irq,
-	.reset = sdhci_reset,
+	.reset = sdhci_am654_reset,
 };
 
 static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = {
@@ -719,6 +737,9 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev,
 	device_property_read_u32(dev, "ti,clkbuf-sel",
 				 &sdhci_am654->clkbuf_sel);
 
+	if (device_property_read_bool(dev, "ti,fails-without-test-cd"))
+		sdhci_am654->quirks |= SDHCI_AM654_QUIRK_FORCE_CDTEST;
+
 	sdhci_get_of_property(pdev);
 
 	return 0;
-- 
2.17.1


  parent reply	other threads:[~2022-04-18 10:21 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-18 10:20 [PATCH 0/2] MMC: Add quirk to set the TESTCD bit Aswath Govindraju
2022-04-18 10:20 ` [PATCH 1/2] dt-bindings: mmc: sdhci-am654: Add flag to force setting to " Aswath Govindraju
2022-04-21 12:10   ` Ulf Hansson
2022-04-25  6:19     ` Aswath Govindraju
2022-04-18 10:20 ` Aswath Govindraju [this message]
2022-04-18 11:55   ` [PATCH 2/2] drivers: mmc: sdhci_am654: Add the quirk to set " kernel test robot
2022-04-18 14:49   ` kernel test robot
2022-04-21 12:11   ` Ulf Hansson
2022-04-25  6:44     ` Aswath Govindraju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220418102040.4993-3-a-govindraju@ti.com \
    --to=a-govindraju@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).