From: Shawn Guo <shawnguo@kernel.org>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>,
David Jander <david@protonic.nl>,
devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Robin van der Gracht <robin@protonic.nl>
Subject: Re: [PATCH v1 01/17] arm: dts: imx6qdl-vicut1.dtsi: remove TiWi module
Date: Mon, 18 Apr 2022 19:49:08 +0800 [thread overview]
Message-ID: <20220418114908.GI391514@dragon> (raw)
In-Reply-To: <20220412074004.2485264-2-o.rempel@pengutronix.de>
On Tue, Apr 12, 2022 at 09:39:48AM +0200, Oleksij Rempel wrote:
> From: David Jander <david@protonic.nl>
>
> Only the first prototypes had a TiWi module. There is no publicly available
> hardware where this module is fitted and there are no plant to produce
s/plant/plan?
Shawn
> any.
>
> Signed-off-by: David Jander <david@protonic.nl>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 51 ---------------------------
> 1 file changed, 51 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
> index ec39008c0950..fe2685642bf1 100644
> --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
> @@ -144,18 +144,6 @@ reg_otg_vbus: regulator-otg-vbus {
> enable-active-high;
> };
>
> - reg_wifi: regulator-wifi {
> - compatible = "regulator-fixed";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_wifi_npd>;
> - regulator-name = "wifi";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - startup-delay-us = <70000>;
> - };
> -
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,name = "prti6q-sgtl5000";
> @@ -530,26 +518,6 @@ &usdhc1 {
> status = "okay";
> };
>
> -&usdhc2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc2>;
> - vmmc-supply = <®_wifi>;
> - non-removable;
> - cap-power-off-card;
> - keep-power-in-suspend;
> - no-1-8-v;
> - no-mmc;
> - no-sd;
> - status = "okay";
> -
> - wifi {
> - compatible = "ti,wl1271";
> - interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
> - ref-clock-frequency = "38400000";
> - tcxo-clock-frequency = "19200000";
> - };
> -};
> -
> &usdhc3 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -808,19 +776,6 @@ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
> >;
> };
>
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
> - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
> - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> - /* WL12xx IRQ */
> - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
> - >;
> - };
> -
> pinctrl_usdhc3: usdhc3grp {
> fsl,pins = <
> MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
> @@ -836,10 +791,4 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
> MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
> >;
> };
> -
> - pinctrl_wifi_npd: wifinpdgrp {
> - fsl,pins = <
> - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
> - >;
> - };
> };
> --
> 2.30.2
>
next prev parent reply other threads:[~2022-04-18 11:49 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 7:39 [PATCH v1 00/17] protonic fixes Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 01/17] arm: dts: imx6qdl-vicut1.dtsi: remove TiWi module Oleksij Rempel
2022-04-18 11:49 ` Shawn Guo [this message]
2022-04-12 7:39 ` [PATCH v1 02/17] arm: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grp Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 03/17] arm: dts: imx6qdl-vicut1.dtsi: Remove PCIe Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 04/17] arm: dts: imx6qdl-vicut1/victgo: Remove UART2 Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 05/17] arm: dts: imx6qdl-vicut1.dtsi: Fix LED names Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 06/17] arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 07/17] arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 08/17] arm: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entry Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 09/17] arm: dts: imx6q-vicut1.dts: remove sata node Oleksij Rempel
2022-04-18 11:53 ` Shawn Guo
2022-04-12 7:39 ` [PATCH v1 10/17] arm: dts: imx6dl-victgo.dts: update gpio names Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 11/17] arm: dts: imx6dl-victgo.dts: Factor out common parts to imx6qdl-victgo.dtsi Oleksij Rempel
2022-04-12 7:39 ` [PATCH v1 12/17] arm: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files Oleksij Rempel
2022-04-12 7:40 ` [PATCH v1 13/17] arm: dts: Remove imx6qdl-victgo.dtsi Oleksij Rempel
2022-04-12 7:40 ` [PATCH v1 14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants Oleksij Rempel
2022-04-12 7:40 ` [PATCH v1 15/17] arm: dts: imx6dl-victgo.dts: Remove touchscreen x axis inversion Oleksij Rempel
2022-04-12 7:40 ` [PATCH v1 16/17] arm: dts: imx6qdl-vicut1.dtsi: Add missing ISB led node Oleksij Rempel
2022-04-12 7:40 ` [PATCH v1 17/17] arm: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to it Oleksij Rempel
2022-04-18 11:48 ` [PATCH v1 00/17] protonic fixes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220418114908.GI391514@dragon \
--to=shawnguo@kernel.org \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).