From: Michael Walle <michael@walle.cc>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: UNGLinuxDriver@microchip.com, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc>
Subject: [PATCH 1/3] MIPS: mscc: jaguar2: rename pinctrl nodes
Date: Wed, 20 Apr 2022 21:50:16 +0200 [thread overview]
Message-ID: <20220420195018.3417053-1-michael@walle.cc> (raw)
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <michael@walle.cc>
---
The YAML conversion patch is alread in
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 10 +++++-----
arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 10 +++++-----
arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 6 +++---
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
index d80cd6842b2a..0ea7bc5b5746 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
@@ -180,27 +180,27 @@ synce_builtin_pins: synce-builtin-pins {
pins = "GPIO_49";
function = "si";
};
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
- i2cmux_2: i2cmux-2 {
+ i2cmux_2: i2cmux-2-pins {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
- i2cmux_3: i2cmux-3 {
+ i2cmux_3: i2cmux-3-pins {
pins = "GPIO_21";
function = "twi_scl_m";
output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
index 813c5e16013c..05d8c6a96dc4 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
@@ -79,27 +79,27 @@ cpld_fifo_pins: synce-builtin-pins {
};
&gpio {
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_18";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
- i2cmux_2: i2cmux-2 {
+ i2cmux_2: i2cmux-2-pins {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
- i2cmux_3: i2cmux-3 {
+ i2cmux_3: i2cmux-3-pins {
pins = "GPIO_21";
function = "twi_scl_m";
output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
index 27c644f2d17f..cf2cf591a211 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
@@ -39,17 +39,17 @@ i2c151: i2c@1 {
};
&gpio {
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_16";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_16";
function = "twi_scl_m";
output-high;
--
2.30.2
next reply other threads:[~2022-04-20 19:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-20 19:50 Michael Walle [this message]
2022-04-20 19:50 ` [PATCH 2/3] MIPS: mscc: ocelot: rename pinctrl nodes Michael Walle
2022-04-20 19:50 ` [PATCH 3/3] MIPS: mscc: serval: " Michael Walle
2022-04-27 9:00 ` [PATCH 1/3] MIPS: mscc: jaguar2: " Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220420195018.3417053-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).