From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>, <soc@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-kernel@vger.kernel.org>, Marek Vasut <marex@denx.de>,
Ahmad Fatoum <a.fatoum@pengutronix.de>, <etienne.carriere@st.com>
Subject: [PATCH 0/8] Add SCMI version of ST boards
Date: Fri, 22 Apr 2022 17:09:44 +0200 [thread overview]
Message-ID: <20220422150952.20587-1-alexandre.torgue@foss.st.com> (raw)
The aim of this series is to add OPTEE and SCMI support for STM32 boards in
order to enable secure services for clocks and resets. New boards have been added
to enable this support in order to not break boot of current STM32 boards users.
This series targets only boards provided by ST which are:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
Some modifications in bindings files (yaml and .h) was needed and OPTEE/TEE
configs are now enabled by default for ARCH_STM32 architecture.
Note that patch [1] "dt-bindings: rcc: Add optional external ethernet RX clock
properties" done by Marek has been already merged in Rob tree.
Thanks
Alex
Alexandre Torgue (7):
dt-bindings: clock: stm32mp1: describes clocks if
"st,stm32mp1-rcc-secure"
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: reset: stm32mp15: rename RST_SCMI define
ARM: stm32: select OPTEE on MPU family
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: arm: stm32: Add SCMI version of STM32 boards
(DK1/DK2/ED1/EV1)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Marek Vasut (1):
dt-bindings: rcc: Add optional external ethernet RX clock properties
.../devicetree/bindings/arm/stm32/stm32.yaml | 17 +++
.../bindings/clock/st,stm32mp1-rcc.yaml | 34 ++++++
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/stm32mp151.dtsi | 41 +++++++
arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts | 86 +++++++++++++++
arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts | 95 +++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts | 91 ++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts | 100 ++++++++++++++++++
arch/arm/mach-stm32/Kconfig | 2 +
include/dt-bindings/clock/stm32mp1-clks.h | 46 ++++----
include/dt-bindings/reset/stm32mp1-resets.h | 24 ++---
11 files changed, 503 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
--
2.17.1
next reply other threads:[~2022-04-22 15:10 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 15:09 Alexandre Torgue [this message]
2022-04-22 15:09 ` [PATCH 1/8] dt-bindings: rcc: Add optional external ethernet RX clock properties Alexandre Torgue
2022-04-22 16:28 ` Marek Vasut
2022-04-25 17:21 ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Alexandre Torgue
2022-04-22 16:31 ` Marek Vasut
2022-04-25 19:11 ` Rob Herring
2022-04-25 19:35 ` Marek Vasut
2022-04-26 18:44 ` Rob Herring
2022-05-02 21:13 ` Rob Herring
[not found] ` <CAL_JsqKU28BNrozg20_a_XMUmBhaoDHdodWkzyRoH=VcM2pDjg@mail.gmail.com>
2022-05-06 10:02 ` Alexandre TORGUE
[not found] ` <CAL_JsqK5ox681qQFz6b4a8eSaNHJ08XmB2bTE=EZ2Pch0YDJqA@mail.gmail.com>
[not found] ` <CAL_JsqKfA1joqDiophO4qk0S1XfgxE2EWUBrxqXrGdfjOAe=ew@mail.gmail.com>
2022-05-09 12:55 ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 3/8] dt-bindings: clock: stm32mp15: rename CK_SCMI define Alexandre Torgue
2022-05-02 21:26 ` Rob Herring
2022-04-22 15:09 ` [PATCH 4/8] dt-bindings: reset: stm32mp15: rename RST_SCMI define Alexandre Torgue
2022-05-02 21:27 ` Rob Herring
2022-04-22 15:09 ` [PATCH 5/8] ARM: stm32: select OPTEE on MPU family Alexandre Torgue
2022-04-22 15:37 ` Ahmad Fatoum
2022-04-22 16:23 ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 6/8] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 Alexandre Torgue
2022-04-22 16:32 ` Marek Vasut
2022-04-25 10:19 ` Etienne CARRIERE
2022-04-25 10:25 ` Marek Vasut
2022-04-25 10:30 ` Rouven Czerwinski
2022-04-22 15:09 ` [PATCH 7/8] dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Alexandre Torgue
2022-05-02 21:28 ` Rob Herring
2022-04-22 15:09 ` [PATCH 8/8] ARM: dts: " Alexandre Torgue
2022-05-03 14:51 ` [PATCH 0/8] Add SCMI version of ST boards Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422150952.20587-1-alexandre.torgue@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=etienne.carriere@st.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).