Re: [Patch v9 1/4] memory: tegra: Add memory controller channels support

Krzysztof Kozlowski
2022-04-29T07:12:05Z

On 26/04/2022 09:38, Ashish Mhetre wrote:
> From tegra186 onwards, memory controller support multiple channels.
> Add support for mapping address spaces of these channels.
> Add number of channels supported by tegra186, tegra194 and tegra234.
> In case of old bindings, channels won't be present. If channels are not
> present then print warning and continue so that backward compatibility
> will be preserved in driver.
> During error interrupts from memory controller, appropriate registers
> from these channels need to be accessed for logging error info.
>
> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
> Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
> ---
> drivers/memory/tegra/mc.c | 6 ++++++
> drivers/memory/tegra/tegra186.c | 34 +++++++++++++++++++++++++++++++++
> drivers/memory/tegra/tegra194.c | 1 +
> drivers/memory/tegra/tegra234.c | 1 +

This does not apply, neither on my mem-ctrl-next, nor on master.
Probably because tegra234 is somewhere else (Thierry?). Either you send
it without tegra234 or it goes via Thierry's tree.

Best regards,
Krzysztof