[PATCH v4 3/3] dt-bindings: clock: qcom,gcc-apq8064: split tsens to the child node

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Split tsens properties to the child node of the gcc. This follows the
lead of ipq8064 (which also uses a separate node for tsens) and makes
device tree closer to other platforms, where tsens is a completely
separate device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../bindings/clock/qcom,gcc-apq8064.yaml      | 45 +++++++------------
 1 file changed, 17 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index b867da12761e..f2762599f679 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -23,47 +23,36 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,gcc-apq8064
-      - qcom,gcc-msm8060
-
-  nvmem-cells:
-    minItems: 1
-    maxItems: 2
-    description:
-      Qualcomm TSENS (thermal sensor device) on some devices can
-      be part of GCC and hence the TSENS properties can also be part
-      of the GCC/clock-controller node.
-      For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
-
-  nvmem-cell-names:
-    minItems: 1
     items:
-      - const: calib
-      - const: calib_backup
-
-  '#thermal-sensor-cells':
-    const: 1
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8060
+      - const: syscon
 
 required:
   - compatible
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
 
 unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+        };
     };
 ...
-- 
2.35.1