[PATCH v3 3/5] PCI: qcom: Handle MSI IRQs properly

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On Qualcomm platforms each group of 32 MSI vectors is routed to the
separate GIC interrupt. Thus to receive higher MSI vectors properly,
enable has_split_msi_irq support.

Note, that if DT doesn't list extra MSI interrupts, DWC core will limit
the amount of supported MSI vectors accordingly (to 32).

Fixes: 20f1bfb8dd62 ("PCI: qcom: Add support for handling MSIs from 8 endpoints")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 45631c0aa468..78c4e2bcf38a 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1587,6 +1587,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pci->ops = &dw_pcie_ops;
 	pp = &pci->pp;
 	pp->num_vectors = MAX_MSI_IRQS;
+	pp->has_split_msi_irq = true;
 
 	pcie->pci = pci;
 
-- 
2.35.1