From: Shawn Guo <shawnguo@kernel.org>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Marek Vasut <marex@denx.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 00/11] consolidated i.MX8MP HSIO/MEDIA/HDMI blk-ctrl series
Date: Thu, 5 May 2022 09:38:54 +0800 [thread overview]
Message-ID: <20220505013854.GE14615@dragon> (raw)
In-Reply-To: <20220406153402.1265474-1-l.stach@pengutronix.de>
On Wed, Apr 06, 2022 at 05:33:51PM +0200, Lucas Stach wrote:
> Hi all,
>
> this series adds a bunch more power domains that integrate with the blk-ctrls
> to the i.MX8MP. It depends on the i.MX8MP GPCv2 support series posted in [1].
>
> The HSIO blk-ctrl bindings are already applied upstream, so they are not part
> of this series anymore. The DT description hasn't changed, but the
> implementation of the HSIO blk-ctrl driver is reworked quite a bit from the
> last round of patches, so I've dropped the review/tested-by tags.
>
> I've also picked up the pretty thoroughly reviewed and tested MEDIA blk-ctrl
> patches from Paul and Laurent into this series, as they would conflict with
> other patches from this series when applied separately. This should hopefully
> make it easier for Shawn to pick things up.
>
> Finally this now also adds the HDMI blk-ctrl, not part of any previous series.
> This one is pretty complex and the documentation in the reference manual
> appears to be inaccurate. I found at least the following issues:
>
> 1. GLOBAL_XTAL24M_CLK_EN does not actually gate the 24MHz reference clock,
> the PHY PLL happily locks and provides correct clocks without this clock being
> ungated. It seems to gate some clock input of the HDMI TX controller instead,
> register access to this controller fails without this clock.
>
> 2. HDMI_RTX_RESET_CTL0 bits 6 and 7 are marked as "reserved" in the manual,
> but they are actually required to be configured. Bit 6 seems to keep something
> in the display pixel clock path in inactive state and Bit 7 seems to reset
> the HDMI TX i2c controller.
>
> The HDMI blk-ctrl part is tested quite extensively with a PoC HDMI support
> patchset, which I will send out in a bit, so I'm pretty sure that the
> support as implemented is working. I've put the patches last in the series
> in case that this turns out to be controversial, so the other patches can
> be applied independent from the HDMI support.
>
> Regards,
> Lucas
>
> [1] https://lore.kernel.org/all/20220330104620.3600159-1-l.stach@pengutronix.de/
>
>
> Laurent Pinchart (1):
> arm64: dts: imx8mp: Add MEDIAMIX power domains
>
> Lucas Stach (7):
> soc: imx: imx8m-blk-ctrl: set power device name
> soc: imx: add i.MX8MP HSIO blk-ctrl
> dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
> dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
> soc: imx: add i.MX8MP HDMI blk-ctrl
> arm64: dts: imx8mp: add HSIO power-domains
> arm64: dts: imx8mp: add HDMI power-domains
Applied all except this one.
Shawn
>
> Paul Elder (3):
> dt-bindings: soc: Add i.MX8MP media block control DT bindings
> soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
> arm64: dts: imx8mp: Add MEDIA_BLK_CTRL
>
> .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml | 84 +++
> .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 104 +++
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 153 +++-
> drivers/soc/imx/Makefile | 1 +
> drivers/soc/imx/imx8m-blk-ctrl.c | 124 +++-
> drivers/soc/imx/imx8mp-blk-ctrl.c | 696 ++++++++++++++++++
> include/dt-bindings/power/imx8mp-power.h | 18 +
> 7 files changed, 1172 insertions(+), 8 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
> create mode 100644 drivers/soc/imx/imx8mp-blk-ctrl.c
>
> --
> 2.30.2
>
prev parent reply other threads:[~2022-05-05 1:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 15:33 [PATCH v4 00/11] consolidated i.MX8MP HSIO/MEDIA/HDMI blk-ctrl series Lucas Stach
2022-04-06 15:33 ` [PATCH v4 01/11] soc: imx: imx8m-blk-ctrl: set power device name Lucas Stach
2022-04-25 21:28 ` Laurent Pinchart
2022-04-06 15:33 ` [PATCH v4 02/11] soc: imx: add i.MX8MP HSIO blk-ctrl Lucas Stach
2022-04-06 23:43 ` Marek Vasut
2022-04-07 9:12 ` Lucas Stach
2022-04-10 22:11 ` Marek Vasut
2022-04-11 16:46 ` Lucas Stach
2022-04-11 22:25 ` Marek Vasut
2022-04-06 15:33 ` [PATCH v4 03/11] dt-bindings: soc: Add i.MX8MP media block control DT bindings Lucas Stach
2022-05-09 12:39 ` Rob Herring
2022-05-10 19:59 ` Laurent Pinchart
2022-04-06 15:33 ` [PATCH v4 04/11] soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl Lucas Stach
2022-04-06 15:33 ` [PATCH v4 05/11] dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains Lucas Stach
2022-04-13 18:35 ` Rob Herring
2022-04-06 15:33 ` [PATCH v4 06/11] dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl Lucas Stach
2022-04-13 18:37 ` Rob Herring
2022-04-06 15:33 ` [PATCH v4 07/11] soc: imx: add " Lucas Stach
2022-04-06 23:56 ` Marek Vasut
2022-04-06 15:33 ` [PATCH v4 08/11] arm64: dts: imx8mp: add HSIO power-domains Lucas Stach
2022-04-06 15:34 ` [PATCH v4 09/11] arm64: dts: imx8mp: Add MEDIAMIX power domains Lucas Stach
2022-04-06 15:34 ` [PATCH v4 10/11] arm64: dts: imx8mp: Add MEDIA_BLK_CTRL Lucas Stach
2022-04-06 15:34 ` [PATCH v4 11/11] arm64: dts: imx8mp: add HDMI power-domains Lucas Stach
2022-05-04 8:27 ` [PATCH v4 00/11] consolidated i.MX8MP HSIO/MEDIA/HDMI blk-ctrl series Lucas Stach
2022-05-04 8:48 ` Laurent Pinchart
2022-05-04 8:56 ` Lucas Stach
2022-05-04 10:08 ` Laurent Pinchart
2022-05-04 10:19 ` Marek Vasut
2022-05-05 1:38 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220505013854.GE14615@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=marex@denx.de \
--cc=paul.elder@ideasonboard.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).