From: Shawn Guo <shawnguo@kernel.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2 0/3] arm64: add i.MX93 support
Date: Thu, 5 May 2022 16:26:07 +0800 [thread overview]
Message-ID: <20220505082607.GE14615@dragon> (raw)
In-Reply-To: <20220503122951.4147636-1-peng.fan@oss.nxp.com>
Hi Peng,
On Tue, May 03, 2022 at 08:29:48PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
>
> V2:
> Update License
>
> Add i.MX93 dtsi and 11x11 evk board support
>
> The required bindings and drivers has already been in tree.
> There arem checkpatch error for the pin header files as other i.MX pin
> pin header files.
>
> Peng Fan (3):
> arm64: dts: freescale: Add i.MX93 dtsi support
> arm64: dts: freescale: add i.MX93 11x11 EVK basic support
> arm64: defconfig: enable i.MX93 clk & pinctrl
Could you check if we can eliminate some (if not all) of the dtbs_check
issues below?
Shawn
DTC arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb
CHECK arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'compatible' is a required property
From schema: .local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'model' is a required property
From schema: .local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44380000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/serial@44380000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44390000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/serial@44390000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: pinctrl@443c0000: 'pinctrl-0' is a dependency of 'pinctrl-names'
From schema: .local/lib/python3.8/site-packages/dtschema/schemas/pinctrl/pinctrl-consumer.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/anatop@44480000: failed to match any schema with compatible: ['fsl,imx93-anatop', 'syscon']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42570000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42570000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42580000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42580000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42590000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42590000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@425a0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@425a0000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42690000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42690000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@426a0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart']
'fsl,imx8ulp-lpuart' was expected
'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imx8qxp-lpuart' was expected
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@426a0000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart']
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43810000: interrupts: [[0, 57, 4], [0, 58, 4]] is too long
From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43820000: interrupts: [[0, 59, 4], [0, 60, 4]] is too long
From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43830000: interrupts: [[0, 189, 4], [0, 190, 4]] is too long
From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@47400000: interrupts: [[0, 10, 4], [0, 11, 4]] is too long
From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
next prev parent reply other threads:[~2022-05-05 8:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS)
2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS)
2022-05-05 3:19 ` Rob Herring
2022-05-05 8:44 ` Shawn Guo
2022-05-07 6:46 ` Peng Fan
2022-05-09 21:04 ` Rob Herring
2022-05-03 12:29 ` [PATCH V2 2/3] arm64: dts: freescale: add i.MX93 11x11 EVK basic support Peng Fan (OSS)
2022-05-03 12:29 ` [PATCH V2 3/3] arm64: defconfig: enable i.MX93 clk & pinctrl Peng Fan (OSS)
2022-05-05 8:26 ` Shawn Guo [this message]
2022-05-05 8:29 ` [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan
2022-05-05 9:26 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220505082607.GE14615@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).