From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Eddie James <eajames@linux.ibm.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
<lars@metafoo.de>, <jic23@kernel.org>, <miltonm@us.ibm.com>,
David Barksdale <dbarksdale@uplogix.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
Date: Fri, 13 May 2022 17:47:00 +0100 [thread overview]
Message-ID: <20220513174700.00005ef4@Huawei.com> (raw)
In-Reply-To: <306c28b7-7318-9b8d-f512-d6e78bd05e51@linux.ibm.com>
On Thu, 12 May 2022 12:08:57 -0500
Eddie James <eajames@linux.ibm.com> wrote:
> On 5/12/22 11:51, Jonathan Cameron wrote:
> > On Thu, 12 May 2022 11:20:19 -0500
> > Eddie James <eajames@linux.ibm.com> wrote:
> >
> >> Document the si7020 bindings with a new "silabs,skip-reset" property.
> >>
> >> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> >> ---
> >> .../bindings/iio/humidity/silabs,si7020.yaml | 47 +++++++++++++++++++
> >> .../devicetree/bindings/trivial-devices.yaml | 2 -
> >> 2 files changed, 47 insertions(+), 2 deletions(-)
> >> create mode 100644 Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml b/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >> new file mode 100644
> >> index 000000000000..9bee010f8d56
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >> @@ -0,0 +1,47 @@
> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/iio/humidity/silabs,si7020.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: SI7020 humidity + temperature sensor
> >> +
> >> +maintainers:
> >> + - David Barksdale <dbarksdale@uplogix.com>
> > At least cc David if you are going to commit him to maintaining this binding :)
> > +CC David at that address.
>
>
> Yes, my mail to him for v1 was undeliverable... I guess I should put
> myself instead.
>
That's the best answer :)
(backup is to rely on the fallback which is me but I'd definitely rather bindings
had attentive maintainers where possible!).
>
> >
> >> +
> >> +description: |
> >> + The Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors
> >> + are i2c devices which have an identical programming interface for
> >> + measuring relative humidity and temperature.
> >> +
> >> +properties:
> >> + compatible:
> >> + const: silabs,si7020
> >> +
> >> + reg:
> >> + maxItems: 1
> >> +
> >> + siliabs,skip-reset:
> >> + $ref: /schemas/types.yaml#/definitions/flag
> >> + description:
> >> + Disables resetting of the device during probe
> >> +
> >> +required:
> >> + - compatible
> >> + - reg
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> + - |
> >> + i2c0 {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + si7021-a20@40 {
> >> + silabs,skip-reset;
> >> + compatible = "silabs,si7020";
> >> + reg = <0x40>;
> >> + };
> >> + };
> >> +...
> >> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> >> index e5295faef52f..47a00b478867 100644
> >> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> >> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> >> @@ -317,8 +317,6 @@ properties:
> >> - sensortek,stk8ba50
> >> # SGX Sensortech VZ89X Sensors
> >> - sgx,vz89x
> >> - # Relative Humidity and Temperature Sensors
> >> - - silabs,si7020
> >> # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
> >> - skyworks,sky81452
> >> # Socionext SynQuacer TPM MMIO module
next prev parent reply other threads:[~2022-05-13 16:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 16:20 [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe Eddie James
2022-05-12 16:20 ` [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings Eddie James
2022-05-12 16:51 ` Jonathan Cameron
2022-05-12 17:08 ` Eddie James
2022-05-13 16:47 ` Jonathan Cameron [this message]
2022-05-13 8:55 ` Krzysztof Kozlowski
2022-05-12 16:20 ` [PATCH v2 2/2] iio: humidity: si7020: Check device property for skipping reset in probe Eddie James
2022-05-12 16:48 ` [PATCH v2 0/2] " Jonathan Cameron
2022-05-12 17:08 ` Eddie James
2022-05-13 16:45 ` Jonathan Cameron
2022-05-13 22:48 ` Peter Rosin
2022-05-14 13:43 ` Jonathan Cameron
2022-05-14 15:02 ` Peter Rosin
2022-05-18 15:28 ` Eddie James
2022-05-18 15:51 ` Eddie James
2022-05-12 19:11 ` Eddie James
2022-05-14 13:40 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513174700.00005ef4@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=dbarksdale@uplogix.com \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miltonm@us.ibm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).