devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/3] arm64: dts: qcom: sdm660: add device node for the compute PAS
Date: Sat, 14 May 2022 03:03:09 +0300	[thread overview]
Message-ID: <20220514000310.3070578-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220514000310.3070578-1-dmitry.baryshkov@linaro.org>

Add device tree node describing CDSP device found on the SDM660 (but not
on SDM630) platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm660.dtsi | 68 ++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index 023b0ac4118c..3b70eff68807 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -9,6 +9,74 @@
 
 #include "sdm630.dtsi"
 
+/ {
+	reserved-memory {
+		/delete-node/ tzbuffer@94a00000;
+
+		cdsp_region: cdsp@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x600000>;
+			no-map;
+		};
+
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 30>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc {
+		cdsp_pil: remoteproc@1a300000 {
+			compatible = "qcom,sdm660-cdsp-pas";
+			reg = <0x1a300000 0x4040>;
+
+			interrupts-extended =
+				<&intc GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+				<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&cdsp_region>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>;
+
+				label = "turing";
+				mboxes = <&apcs_glb 29>;
+				qcom,remote-pid = <5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
 &adreno_gpu {
 	compatible = "qcom,adreno-512.0", "qcom,adreno";
 	operating-points-v2 = <&gpu_sdm660_opp_table>;
-- 
2.35.1


  parent reply	other threads:[~2022-05-14  2:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-14  0:03 [PATCH 0/3] arm64: dts: qcom: enable CDSP and MSS on ifc6560 board Dmitry Baryshkov
2022-05-14  0:03 ` [PATCH 1/3] arm64: dts: qcom: sdm630: add device node for the modem PAS Dmitry Baryshkov
2022-05-14  0:03 ` Dmitry Baryshkov [this message]
2022-05-14 22:51   ` [PATCH 2/3] arm64: dts: qcom: sdm660: add device node for the compute PAS Konrad Dybcio
2022-05-14 23:17     ` Dmitry Baryshkov
2022-05-15 11:02       ` Konrad Dybcio
2022-05-14  0:03 ` [PATCH 3/3] arm64: dts: qcom: sda660-inforce-ifc6560: enable cdsp and modem Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220514000310.3070578-3-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).