Re: [PATCH v5 0/3] Add support for Sercomm partitions

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hello,

miquel.raynal@bootlin.com wrote on Mon, 16 May 2022 18:42:17 +0200:

> Hi Mikhail,
> 
> csharper2005@gmail.com wrote on Mon, 16 May 2022 15:12:28 +0000:
> 
> > This patch series add support for Sercomm mtd partition table parser. It's
> > used in some Beeline, Netgear and Sercomm routers. The Sercomm partition
> > map table contains real partition offsets, which may differ from device to
> > device depending on the number and location of bad blocks on NAND.  
> 
> Series applied in place of the previous version on mtd/next.

Actually we have a new robot warning, so I've dropped patch 3/3 and kept
the bindings for this release.

Thanks,
Miquèl
> 
> > 
> > Changes since:
> > v4:
> >  - Add Acked-by to the first patch
> > 
> > v3:
> >  - Fix commit message of the first patch
> >  - Add Reviewed-by to the second patch
> > 
> > v2:
> >  - Fix mistakes in dt-binding
> >  - Add patch for new vendor prefix
> >  - Add vendor prefix to scpart-id property
> > 
> > v1:
> >  - Add dt-binding in a separate patch
> >  - Remove redundant braces and logical NOT operator
> >  - Define pr_fmt
> >  - Replace kcalloc by kzalloc
> >  - Use of_get_child_count() and alloc big enough array before the
> >    for_each_child_of_node()
> > 
> > Mikhail Zhilkin (3):
> >   dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
> >   dt-bindings: mtd: partitions: Extend fixed-partitions binding
> >   mtd: parsers: add support for Sercomm partitions
> > 
> >  .../mtd/partitions/fixed-partitions.yaml      |  55 +++-
> >  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
> >  drivers/mtd/parsers/Kconfig                   |   9 +
> >  drivers/mtd/parsers/Makefile                  |   1 +
> >  drivers/mtd/parsers/scpart.c                  | 240 ++++++++++++++++++
> >  5 files changed, 305 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/mtd/parsers/scpart.c
> >   
> 
> 
> Thanks,
> Miquèl