Re: [PATCH v2 2/2] dt-bindings: mtd: qcom_nandc: document qcom,boot-pages binding

[Rob Herring <robh@kernel.org>]

On Tue, May 17, 2022 at 10:56:09PM +0200, Ansuel Smith wrote:
> On Mon, May 16, 2022 at 01:49:12PM -0500, Rob Herring wrote:
> > On Tue, May 03, 2022 at 05:43:53PM +0200, Ansuel Smith wrote:
> > > Document new qcom,boot_pages binding used to apply special
> > 
> > s/boot_pages/boot-pages/
> > 
> > > read/write configuration to boot pages.
> > > 
> > > QCOM apply a special configuration where spare data is not protected
> > > by ECC for some special pages (used for boot partition). Add
> > > Documentation on how to declare these special pages.
> > > 
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > >  .../devicetree/bindings/mtd/qcom,nandc.yaml   | 22 +++++++++++++++++++
> > >  1 file changed, 22 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > index 84ad7ff30121..fafeca0cafff 100644
> > > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > @@ -102,6 +102,26 @@ allOf:
> > >              - const: rx
> > >              - const: cmd
> > >  
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            enum:
> > > +              - qcom,ipq8074-nand
> > > +
> > > +    then:
> > > +      properties:
> > > +        qcom,boot-pages:
> > > +          $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > 
> > You need to define the dimensions. Something like this:
> > 
> >              items:
> >                items:
> >                  - description: offset
> >                  - description: size
> >
> 
> Considering this is not limited to one item how should I declare that an
> user can declare multiple items? (the user can declare multiple zones)
> Declaring minItems without a maxItems? 
> 
> I assume in the suggested form it's assumed
> minItems: 1
> maxItems: 1
> so this would be problematic.

No, the outer 'items' being a schema rather than a list means it applies 
to all items and does not set a size of (offset, size) pairs.

If you do have a maximum number, you could set the range.

Rob