From: "Clément Léger" <clement.leger@bootlin.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Clément Léger" <clement.leger@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Herve Codina" <herve.codina@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Milan Stevanovic" <milan.stevanovic@se.com>,
"Jimmy Lalande" <jimmy.lalande@se.com>,
"Pascal Eberhard" <pascal.eberhard@se.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
"Rob Herring" <robh@kernel.org>
Subject: [PATCH net-next v5 04/13] dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter
Date: Thu, 19 May 2022 17:30:58 +0200 [thread overview]
Message-ID: <20220519153107.696864-5-clement.leger@bootlin.com> (raw)
In-Reply-To: <20220519153107.696864-1-clement.leger@bootlin.com>
This MII converter can be found on the RZ/N1 processor family. The MII
converter ports are declared as subnodes which are then referenced by
users of the PCS driver such as the switch.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
.../bindings/net/pcs/renesas,rzn1-miic.yaml | 162 ++++++++++++++++++
include/dt-bindings/net/pcs-rzn1-miic.h | 33 ++++
2 files changed, 195 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
create mode 100644 include/dt-bindings/net/pcs-rzn1-miic.h
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
new file mode 100644
index 000000000000..81a2f7d414a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+ - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+ This MII converter is present on the Renesas RZ/N1 SoC family. It is
+ responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-miic
+ - const: renesas,rzn1-miic
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: MII reference clock
+ - description: RGMII reference clock
+ - description: RMII reference clock
+ - description: AHB clock used for the MII converter register interface
+
+ renesas,miic-switch-portin:
+ description: MII Switch PORTIN configuration. This value should use one of
+ the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^mii-conv@[0-5]$":
+ type: object
+ description: MII converter port
+
+ properties:
+ reg:
+ description: MII Converter port number.
+ enum: [1, 2, 3, 4, 5]
+
+ renesas,miic-input:
+ description: Converter input port configuration. This value should use
+ one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - reg
+ - renesas,miic-input
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ reg:
+ const: 1
+ then:
+ properties:
+ renesas,miic-input:
+ const: 0
+ - if:
+ properties:
+ reg:
+ const: 2
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [1, 11]
+ - if:
+ properties:
+ reg:
+ const: 3
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [7, 10]
+ - if:
+ properties:
+ reg:
+ const: 4
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [4, 6, 9, 13]
+ - if:
+ properties:
+ reg:
+ const: 5
+ then:
+ properties:
+ renesas,miic-input:
+ enum: [3, 5, 8, 12]
+
+required:
+ - '#address-cells'
+ - '#size-cells'
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/net/pcs-rzn1-miic.h>
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+ eth-miic@44030000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+ reg = <0x44030000 0x10000>;
+ clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+ <&sysctrl R9A06G032_CLK_RGMII_REF>,
+ <&sysctrl R9A06G032_CLK_RMII_REF>,
+ <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+ renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+ power-domains = <&sysctrl>;
+
+ mii_conv1: mii-conv@1 {
+ renesas,miic-input = <MIIC_GMAC1_PORT>;
+ reg = <1>;
+ };
+
+ mii_conv2: mii-conv@2 {
+ renesas,miic-input = <MIIC_SWITCH_PORTD>;
+ reg = <2>;
+ };
+
+ mii_conv3: mii-conv@3 {
+ renesas,miic-input = <MIIC_SWITCH_PORTC>;
+ reg = <3>;
+ };
+
+ mii_conv4: mii-conv@4 {
+ renesas,miic-input = <MIIC_SWITCH_PORTB>;
+ reg = <4>;
+ };
+
+ mii_conv5: mii-conv@5 {
+ renesas,miic-input = <MIIC_SWITCH_PORTA>;
+ reg = <5>;
+ };
+ };
diff --git a/include/dt-bindings/net/pcs-rzn1-miic.h b/include/dt-bindings/net/pcs-rzn1-miic.h
new file mode 100644
index 000000000000..784782eaec9e
--- /dev/null
+++ b/include/dt-bindings/net/pcs-rzn1-miic.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#ifndef _DT_BINDINGS_PCS_RZN1_MIIC
+#define _DT_BINDINGS_PCS_RZN1_MIIC
+
+/*
+ * Reefer to the datasheet [1] section 8.2.1, Internal Connection of Ethernet
+ * Ports to check the available combination
+ *
+ * [1] REN_r01uh0750ej0140-rzn1-introduction_MAT_20210228.pdf
+ */
+
+#define MIIC_GMAC1_PORT 0
+#define MIIC_GMAC2_PORT 1
+#define MIIC_RTOS_PORT 2
+#define MIIC_SERCOS_PORTA 3
+#define MIIC_SERCOS_PORTB 4
+#define MIIC_ETHERCAT_PORTA 5
+#define MIIC_ETHERCAT_PORTB 6
+#define MIIC_ETHERCAT_PORTC 7
+#define MIIC_SWITCH_PORTA 8
+#define MIIC_SWITCH_PORTB 9
+#define MIIC_SWITCH_PORTC 10
+#define MIIC_SWITCH_PORTD 11
+#define MIIC_HSR_PORTA 12
+#define MIIC_HSR_PORTB 13
+
+#endif
--
2.36.0
next prev parent reply other threads:[~2022-05-19 15:32 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-19 15:30 [PATCH net-next v5 00/13] add support for Renesas RZ/N1 ethernet subsystem devices Clément Léger
2022-05-19 15:30 ` [PATCH net-next v5 01/13] net: dsa: allow port_bridge_join() to override extack message Clément Léger
2022-05-19 17:53 ` Vladimir Oltean
2022-05-19 15:30 ` [PATCH net-next v5 02/13] net: dsa: add support for ethtool get_rmon_stats() Clément Léger
2022-05-19 15:30 ` [PATCH net-next v5 03/13] net: dsa: add Renesas RZ/N1 switch tag driver Clément Léger
2022-05-19 15:30 ` Clément Léger [this message]
2022-05-20 7:09 ` [PATCH net-next v5 04/13] dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter Geert Uytterhoeven
2022-05-19 15:30 ` [PATCH net-next v5 05/13] net: pcs: add Renesas MII converter driver Clément Léger
2022-05-19 16:25 ` Russell King (Oracle)
2022-05-20 7:52 ` Clément Léger
2022-05-20 8:49 ` Vladimir Oltean
2022-05-20 15:22 ` Clément Léger
2022-05-20 15:44 ` Vladimir Oltean
2022-05-20 15:49 ` Clément Léger
2022-05-20 15:58 ` Vladimir Oltean
2022-05-20 16:22 ` Clément Léger
2022-05-19 15:31 ` [PATCH net-next v5 06/13] dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port switch Clément Léger
2022-05-20 7:13 ` Geert Uytterhoeven
2022-05-20 7:57 ` Clément Léger
2022-05-20 8:01 ` Geert Uytterhoeven
2022-05-20 8:16 ` Clément Léger
2022-05-24 2:34 ` Rob Herring
2022-05-19 15:31 ` [PATCH net-next v5 07/13] net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver Clément Léger
2022-05-19 18:08 ` Vladimir Oltean
2022-05-20 7:58 ` Clément Léger
2022-05-19 15:31 ` [PATCH net-next v5 08/13] net: dsa: rzn1-a5psw: add statistics support Clément Léger
2022-05-19 18:24 ` Vladimir Oltean
2022-05-19 15:31 ` [PATCH net-next v5 09/13] net: dsa: rzn1-a5psw: add FDB support Clément Léger
2022-05-19 18:12 ` Vladimir Oltean
2022-05-19 15:31 ` [PATCH net-next v5 10/13] ARM: dts: r9a06g032: describe MII converter Clément Léger
2022-05-19 15:31 ` [PATCH net-next v5 11/13] ARM: dts: r9a06g032: describe GMAC2 Clément Léger
2022-05-20 7:18 ` Geert Uytterhoeven
2022-05-20 8:13 ` Clément Léger
2022-05-20 8:25 ` Geert Uytterhoeven
2022-05-20 8:31 ` Clément Léger
2022-05-20 8:48 ` Geert Uytterhoeven
2022-05-19 15:31 ` [PATCH net-next v5 12/13] ARM: dts: r9a06g032: describe switch Clément Léger
2022-05-19 18:28 ` Vladimir Oltean
2022-05-20 8:18 ` Clément Léger
2022-05-19 15:31 ` [PATCH net-next v5 13/13] MAINTAINERS: add Renesas RZ/N1 switch related driver entry Clément Léger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220519153107.696864-5-clement.leger@bootlin.com \
--to=clement.leger@bootlin.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=geert+renesas@glider.be \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=jimmy.lalande@se.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=milan.stevanovic@se.com \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).