[PATCH v2] media: imx-jpeg: Disable some unused interrupt

[PATCH v2] media: imx-jpeg: Disable some unused interrupt

[Ming Qian]

The interrupt STMBUF_HALF may be triggered after frame done.
It may led to system hang if driver try to access the register after
power off.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.

Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
---
v2
- add Fixes tag
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
index c482228262a3..258fbee7ab66 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
@@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void __iomem *reg)
 
 void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
 {
-	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
+	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
 }
 
 void mxc_jpeg_sw_reset(void __iomem *reg)
-- 
2.36.1

Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt

[mirela.rabulea]

Hi Ming,

On 30.05.2022 10:47, Ming Qian wrote:
> The interrupt STMBUF_HALF may be triggered after frame done.
> It may led to system hang if driver try to access the register after
> power off.
> And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
> So disable them and the unused interrupts.
> 
> Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
> Signed-off-by: Ming Qian <ming.qian@nxp.com>
> ---
> v2
> - add Fixes tag
>   drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> index c482228262a3..258fbee7ab66 100644
> --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> @@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void __iomem *reg)
>   
>   void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
>   {
> -	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> +	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));

There is another way, less aggressive, to go around this, disable all 
the interrupts once FRMDONE is received (or some other error condition), 
interrupts will get re-enabled at the next device_run. I checked this 
works, in mxc_jpeg_dec_irq:
buffers_done:
	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));

Either way, I would also replace this:
	if (!ctx) {
		dev_err(dev,
			"Instance released before the end of transaction.\n");
		/* soft reset only resets internal state, not registers */
		mxc_jpeg_sw_reset(reg);
		/* clear all interrupts */
		writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
		goto job_unlock;
	}

With something like:
BUG_ON(!ctx)

The initial intent of this code was to cope with the same problem, 
STMBUF_HALF interrupt received after FRMDONE, which could not be 
cleared, but it was not done right, I can see the hang in some rare 
cases. We should not run into it anymore, with interrupts disabled, 
either the way you proposed, or mine.

Regards,
Mirela

>   }
>   
>   void mxc_jpeg_sw_reset(void __iomem *reg)

RE: [PATCH v2] media: imx-jpeg: Disable some unused interrupt

[Ming Qian]

> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> Sent: 2022年6月6日 0:43
> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
> hverkuil-cisco@xs4all.nl
> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
> festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>;
> linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt
> 
> Hi Ming,
> 
> On 30.05.2022 10:47, Ming Qian wrote:
> > The interrupt STMBUF_HALF may be triggered after frame done.
> > It may led to system hang if driver try to access the register after
> > power off.
> > And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
> > So disable them and the unused interrupts.
> >
> > Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG
> > Encoder/Decoder")
> > Signed-off-by: Ming Qian <ming.qian@nxp.com>
> > ---
> > v2
> > - add Fixes tag
> >   drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > index c482228262a3..258fbee7ab66 100644
> > --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > @@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void
> > __iomem *reg)
> >
> >   void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
> >   {
> > -	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> > +	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> 
> There is another way, less aggressive, to go around this, disable all the
> interrupts once FRMDONE is received (or some other error condition),
> interrupts will get re-enabled at the next device_run. I checked this works, in
> mxc_jpeg_dec_irq:
> buffers_done:
> 	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> 

Hi Mirela,

Yes, I think it should work if we disable slot interrupt when frame done.
And which solution do you prefer?

Ming

> Either way, I would also replace this:
> 	if (!ctx) {
> 		dev_err(dev,
> 			"Instance released before the end of transaction.\n");
> 		/* soft reset only resets internal state, not registers */
> 		mxc_jpeg_sw_reset(reg);
> 		/* clear all interrupts */
> 		writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
> 		goto job_unlock;
> 	}
> 
> With something like:
> BUG_ON(!ctx)
> 
> The initial intent of this code was to cope with the same problem,
> STMBUF_HALF interrupt received after FRMDONE, which could not be cleared,
> but it was not done right, I can see the hang in some rare cases. We should not
> run into it anymore, with interrupts disabled, either the way you proposed, or
> mine.
> 
> Regards,
> Mirela
> 
> >   }
> >
> >   void mxc_jpeg_sw_reset(void __iomem *reg)

Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt

[mirela.rabulea]

On 06.06.2022 05:33, Ming Qian wrote:
>> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
>> Sent: 2022年6月6日 0:43
>> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
>> hverkuil-cisco@xs4all.nl
>> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
>> festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>;
>> linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
>> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
>> Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt
>>
>> Hi Ming,
>>
>> On 30.05.2022 10:47, Ming Qian wrote:
>>> The interrupt STMBUF_HALF may be triggered after frame done.
>>> It may led to system hang if driver try to access the register after
>>> power off.
>>> And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
>>> So disable them and the unused interrupts.
>>>
>>> Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG
>>> Encoder/Decoder")
>>> Signed-off-by: Ming Qian <ming.qian@nxp.com>
>>> ---
>>> v2
>>> - add Fixes tag
>>>    drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
>>> b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
>>> index c482228262a3..258fbee7ab66 100644
>>> --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
>>> +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
>>> @@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void
>>> __iomem *reg)
>>>
>>>    void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
>>>    {
>>> -	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
>>> +	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
>>
>> There is another way, less aggressive, to go around this, disable all the
>> interrupts once FRMDONE is received (or some other error condition),
>> interrupts will get re-enabled at the next device_run. I checked this works, in
>> mxc_jpeg_dec_irq:
>> buffers_done:
>> 	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
>>
> 
> Hi Mirela,
> 
> Yes, I think it should work if we disable slot interrupt when frame done.
> And which solution do you prefer?

Hi Ming, I don't have a strong preference, but just in case we decide to 
later use some of these interrupts, I would suggest to go with the 
disabling after FRMDONE.

Please do not forget to clean the other code related to "Instance 
released before the end of transaction".

Thanks,
Mirela

> 
> Ming
> 
>> Either way, I would also replace this:
>> 	if (!ctx) {
>> 		dev_err(dev,
>> 			"Instance released before the end of transaction.\n");
>> 		/* soft reset only resets internal state, not registers */
>> 		mxc_jpeg_sw_reset(reg);
>> 		/* clear all interrupts */
>> 		writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
>> 		goto job_unlock;
>> 	}
>>
>> With something like:
>> BUG_ON(!ctx)
>>
>> The initial intent of this code was to cope with the same problem,
>> STMBUF_HALF interrupt received after FRMDONE, which could not be cleared,
>> but it was not done right, I can see the hang in some rare cases. We should not
>> run into it anymore, with interrupts disabled, either the way you proposed, or
>> mine.
>>
>> Regards,
>> Mirela
>>
>>>    }
>>>
>>>    void mxc_jpeg_sw_reset(void __iomem *reg)

RE: [PATCH v2] media: imx-jpeg: Disable some unused interrupt

[Ming Qian]

> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> Sent: 2022年6月6日 17:41
> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
> hverkuil-cisco@xs4all.nl
> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
> festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>;
> linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt
> 
> 
> 
> On 06.06.2022 05:33, Ming Qian wrote:
> >> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> >> Sent: 2022年6月6日 0:43
> >> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
> >> hverkuil-cisco@xs4all.nl
> >> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de;
> >> kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx
> >> <linux-imx@nxp.com>; linux-media@vger.kernel.org;
> >> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org;
> >> linux-arm-kernel@lists.infradead.org
> >> Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused
> >> interrupt
> >>
> >> Hi Ming,
> >>
> >> On 30.05.2022 10:47, Ming Qian wrote:
> >>> The interrupt STMBUF_HALF may be triggered after frame done.
> >>> It may led to system hang if driver try to access the register after
> >>> power off.
> >>> And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
> >>> So disable them and the unused interrupts.
> >>>
> >>> Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8
> >>> JPEG
> >>> Encoder/Decoder")
> >>> Signed-off-by: Ming Qian <ming.qian@nxp.com>
> >>> ---
> >>> v2
> >>> - add Fixes tag
> >>>    drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
> >>>    1 file changed, 1 insertion(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> >>> b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> >>> index c482228262a3..258fbee7ab66 100644
> >>> --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> >>> +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> >>> @@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void
> >>> __iomem *reg)
> >>>
> >>>    void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
> >>>    {
> >>> -	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> >>> +	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> >>
> >> There is another way, less aggressive, to go around this, disable all
> >> the interrupts once FRMDONE is received (or some other error
> >> condition), interrupts will get re-enabled at the next device_run. I
> >> checked this works, in
> >> mxc_jpeg_dec_irq:
> >> buffers_done:
> >> 	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> >>
> >
> > Hi Mirela,
> >
> > Yes, I think it should work if we disable slot interrupt when frame done.
> > And which solution do you prefer?
> 
> Hi Ming, I don't have a strong preference, but just in case we decide to later
> use some of these interrupts, I would suggest to go with the disabling after
> FRMDONE.
> 
> Please do not forget to clean the other code related to "Instance released
> before the end of transaction".
> 
> Thanks,
> Mirela
> 

OK, I'll make another patch that disable slot interrupt when frame done, and clean the code.

> >
> > Ming
> >
> >> Either way, I would also replace this:
> >> 	if (!ctx) {
> >> 		dev_err(dev,
> >> 			"Instance released before the end of transaction.\n");
> >> 		/* soft reset only resets internal state, not registers */
> >> 		mxc_jpeg_sw_reset(reg);
> >> 		/* clear all interrupts */
> >> 		writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
> >> 		goto job_unlock;
> >> 	}
> >>
> >> With something like:
> >> BUG_ON(!ctx)
> >>
> >> The initial intent of this code was to cope with the same problem,
> >> STMBUF_HALF interrupt received after FRMDONE, which could not be
> >> cleared, but it was not done right, I can see the hang in some rare
> >> cases. We should not run into it anymore, with interrupts disabled,
> >> either the way you proposed, or mine.
> >>
> >> Regards,
> >> Mirela
> >>
> >>>    }
> >>>
> >>>    void mxc_jpeg_sw_reset(void __iomem *reg)

RE: [PATCH v2] media: imx-jpeg: Disable some unused interrupt

[Ming Qian]

This patch can be superseded now.
It was replaced by another patch https://patchwork.linuxtv.org/project/linux-media/patch/20220607072315.23209-1-ming.qian@nxp.com/


> From: Ming Qian
> Sent: 2022年6月7日 9:49
> To: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>;
> mchehab@kernel.org; hverkuil-cisco@xs4all.nl
> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
> festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>;
> linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Subject: RE: [PATCH v2] media: imx-jpeg: Disable some unused interrupt
> 
> > From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> > Sent: 2022年6月6日 17:41
> > To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
> > hverkuil-cisco@xs4all.nl
> > Cc: shawnguo@kernel.org; s.hauer@pengutronix.de;
> > kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx
> > <linux-imx@nxp.com>; linux-media@vger.kernel.org;
> > linux-kernel@vger.kernel.org; devicetree@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org
> > Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused interrupt
> >
> >
> >
> > On 06.06.2022 05:33, Ming Qian wrote:
> > >> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> > >> Sent: 2022年6月6日 0:43
> > >> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
> > >> hverkuil-cisco@xs4all.nl
> > >> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de;
> > >> kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx
> > >> <linux-imx@nxp.com>; linux-media@vger.kernel.org;
> > >> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org;
> > >> linux-arm-kernel@lists.infradead.org
> > >> Subject: Re: [PATCH v2] media: imx-jpeg: Disable some unused
> > >> interrupt
> > >>
> > >> Hi Ming,
> > >>
> > >> On 30.05.2022 10:47, Ming Qian wrote:
> > >>> The interrupt STMBUF_HALF may be triggered after frame done.
> > >>> It may led to system hang if driver try to access the register
> > >>> after power off.
> > >>> And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
> > >>> So disable them and the unused interrupts.
> > >>>
> > >>> Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8
> > >>> JPEG
> > >>> Encoder/Decoder")
> > >>> Signed-off-by: Ming Qian <ming.qian@nxp.com>
> > >>> ---
> > >>> v2
> > >>> - add Fixes tag
> > >>>    drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 2 +-
> > >>>    1 file changed, 1 insertion(+), 1 deletion(-)
> > >>>
> > >>> diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > >>> b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > >>> index c482228262a3..258fbee7ab66 100644
> > >>> --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > >>> +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
> > >>> @@ -76,7 +76,7 @@ void print_wrapper_info(struct device *dev, void
> > >>> __iomem *reg)
> > >>>
> > >>>    void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
> > >>>    {
> > >>> -	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> > >>> +	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> > >>
> > >> There is another way, less aggressive, to go around this, disable
> > >> all the interrupts once FRMDONE is received (or some other error
> > >> condition), interrupts will get re-enabled at the next device_run.
> > >> I checked this works, in
> > >> mxc_jpeg_dec_irq:
> > >> buffers_done:
> > >> 	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
> > >>
> > >
> > > Hi Mirela,
> > >
> > > Yes, I think it should work if we disable slot interrupt when frame done.
> > > And which solution do you prefer?
> >
> > Hi Ming, I don't have a strong preference, but just in case we decide
> > to later use some of these interrupts, I would suggest to go with the
> > disabling after FRMDONE.
> >
> > Please do not forget to clean the other code related to "Instance
> > released before the end of transaction".
> >
> > Thanks,
> > Mirela
> >
> 
> OK, I'll make another patch that disable slot interrupt when frame done, and
> clean the code.
> 
> > >
> > > Ming
> > >
> > >> Either way, I would also replace this:
> > >> 	if (!ctx) {
> > >> 		dev_err(dev,
> > >> 			"Instance released before the end of transaction.\n");
> > >> 		/* soft reset only resets internal state, not registers */
> > >> 		mxc_jpeg_sw_reset(reg);
> > >> 		/* clear all interrupts */
> > >> 		writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot,
> SLOT_STATUS));
> > >> 		goto job_unlock;
> > >> 	}
> > >>
> > >> With something like:
> > >> BUG_ON(!ctx)
> > >>
> > >> The initial intent of this code was to cope with the same problem,
> > >> STMBUF_HALF interrupt received after FRMDONE, which could not be
> > >> cleared, but it was not done right, I can see the hang in some rare
> > >> cases. We should not run into it anymore, with interrupts disabled,
> > >> either the way you proposed, or mine.
> > >>
> > >> Regards,
> > >> Mirela
> > >>
> > >>>    }
> > >>>
> > >>>    void mxc_jpeg_sw_reset(void __iomem *reg)