From: Rob Herring <robh@kernel.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
Mike Leach <mike.leach@linaro.org>, Leo Yan <leo.yan@linaro.org>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 3/3] dt-bindings: arm: Convert CoreSight CPU debug to DT schema
Date: Thu, 2 Jun 2022 20:19:33 -0500 [thread overview]
Message-ID: <20220603011933.3277315-4-robh@kernel.org> (raw)
In-Reply-To: <20220603011933.3277315-1-robh@kernel.org>
Convert the CoreSight CPU debug binding to DT schema format.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
v2:
- Update MAINTAINERS entry
---
.../bindings/arm/arm,coresight-cpu-debug.yaml | 81 +++++++++++++++++++
.../bindings/arm/coresight-cpu-debug.txt | 49 -----------
MAINTAINERS | 1 -
3 files changed, 81 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 000000000000..0a6bc03ebe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+ - Mathieu Poirier <mathieu.poirier@linaro.org>
+ - Mike Leach <mike.leach@linaro.org>
+ - Leo Yan <leo.yan@linaro.org>
+ - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+ CoreSight CPU debug component are compliant with the ARMv8 architecture
+ reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+ external debug module is mainly used for two modes: self-hosted debug and
+ external debug, and it can be accessed from mmio region from Coresight and
+ eventually the debug module connects with CPU for debugging. And the debug
+ module provides sample-based profiling extension, which can be used to sample
+ CPU program counter, secure state and exception level, etc; usually every CPU
+ has one dedicated debug module to be connected.
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-cpu-debug
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-cpu-debug
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ cpu:
+ description:
+ A phandle to the cpu this debug component is bound to.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ power-domains:
+ maxItems: 1
+ description:
+ A phandle to the debug power domain if the debug logic has its own
+ dedicated power domain. CPU idle states may also need to be separately
+ constrained to keep CPU cores powered.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - cpu
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ debug@f6590000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0xf6590000 0x1000>;
+ clocks = <&sys_ctrl 1>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu0>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
- "arm,primecell" since this driver is using the AMBA bus
- interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
- using the AMBA framework, the name of the clock providing
- the interconnect should be "apb_pclk" and the clock is
- mandatory. The interface between the debug logic and the
- processor core is clocked by the internal CPU clock, so it
- is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
- to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
- binding to turn on the debug logic if it has own dedicated
- power domain and if necessary to use "cpuidle.off=1" or
- "nohlt" in the kernel command line or sysfs node to
- constrain idle states to ensure registers in the CPU power
- domain are accessible.
-
-Example:
-
- debug@f6590000 {
- compatible = "arm,coresight-cpu-debug","arm,primecell";
- reg = <0 0xf6590000 0 0x1000>;
- clocks = <&sys_ctrl HI6220_DAPB_CLK>;
- clock-names = "apb_pclk";
- cpu = <&cpu0>;
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac2e7163ab14..59042ecb3cbc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1971,7 +1971,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux.git
F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*
-F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
F: Documentation/devicetree/bindings/arm/arm,coresight-*.yaml
F: Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
F: Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
--
2.34.1
next prev parent reply other threads:[~2022-06-03 1:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-03 1:19 [PATCH v2 0/3] dt-bindings: Arm CoreSight binding schema conversions Rob Herring
2022-06-03 1:19 ` [PATCH v2 1/3] dt-bindings: arm: Rename Coresight filenames to match compatible Rob Herring
2022-06-03 1:19 ` [PATCH v2 2/3] dt-bindings: arm: Convert CoreSight bindings to DT schema Rob Herring
2022-06-20 17:17 ` Suzuki K Poulose
2022-06-27 20:11 ` Rob Herring
2022-06-27 21:55 ` Suzuki K Poulose
2022-06-03 1:19 ` Rob Herring [this message]
2022-06-27 21:56 ` [PATCH v2 3/3] dt-bindings: arm: Convert CoreSight CPU debug " Suzuki K Poulose
2022-06-20 16:55 ` [PATCH v2 0/3] dt-bindings: Arm CoreSight binding schema conversions Mathieu Poirier
2022-06-28 18:01 ` Rob Herring
2022-06-29 16:28 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220603011933.3277315-4-robh@kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).