Re: [PATCH v5 03/10] dt-bindings: iio: sx9324: Add precharge resistor setting

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 29 Apr 2022 15:01:37 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> Allow configure the resistance used during precharge.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Acked-by: Rob Herring <robh@kernel.org>
Applied

> ---
> Changes since v4:
> - Add multipleOf propery
> - Move description at the end, to match convension.
> 
> Changes since v3:
> - Added Review tags.
> 
> Changes since v2:
> - Change kOhms into ohms.
> 
> Changes since v1:
> - Suffix field with kOhms unit.
> 
>  .../bindings/iio/proximity/semtech,sx9324.yaml           | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> index b8a6ee16854ff..d689b2bab71b4 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> @@ -126,6 +126,14 @@ properties:
>        UINT_MAX (4294967295) represents infinite. Other values
>        represent 1-1/N.
>  
> +  semtech,input-precharge-resistor-ohms:
> +    default: 4000
> +    multipleOf: 2000
> +    minimum: 0
> +    maximum: 30000
> +    description:
> +      Pre-charge input resistance in Ohm.
> +
>  required:
>    - compatible
>    - reg
> @@ -157,5 +165,6 @@ examples:
>          semtech,ph01-proxraw-strength = <2>;
>          semtech,ph23-proxraw-strength = <2>;
>          semtech,avg-pos-strength = <64>;
> +        semtech,input-precharge-resistor-ohms = <2000>;
>        };
>      };