* [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
@ 2022-06-11 19:57 Andrey Konovalov
2022-06-11 20:03 ` Andrey Konovalov
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Andrey Konovalov @ 2022-06-11 19:57 UTC (permalink / raw)
To: bjorn.andersson, agross
Cc: robh+dt, krzysztof.kozlowski+dt, vinod.koul, linux-arm-msm,
devicetree, linux-kernel, Andrey Konovalov
The current settings refer to "blsp_spi1" function which isn't defined.
For this reason an attempt to enable blsp1_spi1 interface results in
the probe failure below:
[ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
Fix this by making the functions used in qcs404.dtsi to match the contents
of drivers/pinctrl/qcom/pinctrl-qcs404.c.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index d912166b7552..0d9e1f19aa67 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default {
};
blsp1_spi1_default: blsp1-spi1-default {
- pins = "gpio22", "gpio23", "gpio24", "gpio25";
- function = "blsp_spi1";
+ mosi {
+ pins = "gpio22";
+ function = "blsp_spi_mosi_a1";
+ };
+
+ miso {
+ pins = "gpio23";
+ function = "blsp_spi_miso_a1";
+ };
+
+ cs_n {
+ pins = "gpio24";
+ function = "blsp_spi_cs_n_a1";
+ };
+
+ clk {
+ pins = "gpio25";
+ function = "blsp_spi_clk_a1";
+ };
};
blsp1_spi2_default: blsp1-spi2-default {
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
2022-06-11 19:57 [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 Andrey Konovalov
@ 2022-06-11 20:03 ` Andrey Konovalov
2022-06-22 5:18 ` Vinod Koul
2022-07-03 3:55 ` (subset) " Bjorn Andersson
2 siblings, 0 replies; 6+ messages in thread
From: Andrey Konovalov @ 2022-06-11 20:03 UTC (permalink / raw)
To: bjorn.andersson, agross
Cc: robh+dt, krzysztof.kozlowski+dt, vinod.koul, linux-arm-msm,
devicetree, linux-kernel
On 6/11/22 22:57, Andrey Konovalov wrote:
> The current settings refer to "blsp_spi1" function which isn't defined.
> For this reason an attempt to enable blsp1_spi1 interface results in
> the probe failure below:
>
> [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
>
> Fix this by making the functions used in qcs404.dtsi to match the contents
> of drivers/pinctrl/qcom/pinctrl-qcs404.c.
... and Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt.
>
> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index d912166b7552..0d9e1f19aa67 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default {
> };
>
> blsp1_spi1_default: blsp1-spi1-default {
> - pins = "gpio22", "gpio23", "gpio24", "gpio25";
> - function = "blsp_spi1";
> + mosi {
> + pins = "gpio22";
> + function = "blsp_spi_mosi_a1";
> + };
> +
> + miso {
> + pins = "gpio23";
> + function = "blsp_spi_miso_a1";
> + };
> +
> + cs_n {
> + pins = "gpio24";
> + function = "blsp_spi_cs_n_a1";
> + };
> +
> + clk {
> + pins = "gpio25";
> + function = "blsp_spi_clk_a1";
> + };
> };
>
> blsp1_spi2_default: blsp1-spi2-default {
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
2022-06-11 19:57 [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 Andrey Konovalov
2022-06-11 20:03 ` Andrey Konovalov
@ 2022-06-22 5:18 ` Vinod Koul
2022-06-30 14:18 ` Bjorn Andersson
2022-07-03 3:55 ` (subset) " Bjorn Andersson
2 siblings, 1 reply; 6+ messages in thread
From: Vinod Koul @ 2022-06-22 5:18 UTC (permalink / raw)
To: Andrey Konovalov, Bjorn Andersson
Cc: agross, robh+dt, krzysztof.kozlowski+dt, linux-arm-msm,
devicetree, linux-kernel
On 11-06-22, 22:57, Andrey Konovalov wrote:
> The current settings refer to "blsp_spi1" function which isn't defined.
> For this reason an attempt to enable blsp1_spi1 interface results in
> the probe failure below:
>
> [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
>
> Fix this by making the functions used in qcs404.dtsi to match the contents
> of drivers/pinctrl/qcom/pinctrl-qcs404.c.
Right, I cannot find blsp_spi1 which is the only one which is missing,
not sure why...
Bjorn do you recall why SPI1 is treated differently...
>
> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index d912166b7552..0d9e1f19aa67 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default {
> };
>
> blsp1_spi1_default: blsp1-spi1-default {
> - pins = "gpio22", "gpio23", "gpio24", "gpio25";
> - function = "blsp_spi1";
> + mosi {
> + pins = "gpio22";
> + function = "blsp_spi_mosi_a1";
> + };
> +
> + miso {
> + pins = "gpio23";
> + function = "blsp_spi_miso_a1";
> + };
> +
> + cs_n {
> + pins = "gpio24";
> + function = "blsp_spi_cs_n_a1";
> + };
> +
> + clk {
> + pins = "gpio25";
> + function = "blsp_spi_clk_a1";
> + };
> };
>
> blsp1_spi2_default: blsp1-spi2-default {
> --
> 2.25.1
--
~Vinod
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
2022-06-22 5:18 ` Vinod Koul
@ 2022-06-30 14:18 ` Bjorn Andersson
2022-07-01 4:40 ` Vinod Koul
0 siblings, 1 reply; 6+ messages in thread
From: Bjorn Andersson @ 2022-06-30 14:18 UTC (permalink / raw)
To: Vinod Koul
Cc: Andrey Konovalov, agross, robh+dt, krzysztof.kozlowski+dt,
linux-arm-msm, devicetree, linux-kernel
On Wed 22 Jun 00:18 CDT 2022, Vinod Koul wrote:
> On 11-06-22, 22:57, Andrey Konovalov wrote:
> > The current settings refer to "blsp_spi1" function which isn't defined.
> > For this reason an attempt to enable blsp1_spi1 interface results in
> > the probe failure below:
> >
> > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
> >
> > Fix this by making the functions used in qcs404.dtsi to match the contents
> > of drivers/pinctrl/qcom/pinctrl-qcs404.c.
>
> Right, I cannot find blsp_spi1 which is the only one which is missing,
> not sure why...
>
> Bjorn do you recall why SPI1 is treated differently...
>
Looking at the available pinctrl functions, I believe that blsp_spi1 has
two possible mux options; identified b y blsp_spi_*_a1 and
blsp_spi_*_b1.
Regards,
Bjorn
> >
> > Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++--
> > 1 file changed, 19 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > index d912166b7552..0d9e1f19aa67 100644
> > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default {
> > };
> >
> > blsp1_spi1_default: blsp1-spi1-default {
> > - pins = "gpio22", "gpio23", "gpio24", "gpio25";
> > - function = "blsp_spi1";
> > + mosi {
> > + pins = "gpio22";
> > + function = "blsp_spi_mosi_a1";
> > + };
> > +
> > + miso {
> > + pins = "gpio23";
> > + function = "blsp_spi_miso_a1";
> > + };
> > +
> > + cs_n {
> > + pins = "gpio24";
> > + function = "blsp_spi_cs_n_a1";
> > + };
> > +
> > + clk {
> > + pins = "gpio25";
> > + function = "blsp_spi_clk_a1";
> > + };
> > };
> >
> > blsp1_spi2_default: blsp1-spi2-default {
> > --
> > 2.25.1
>
> --
> ~Vinod
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
2022-06-30 14:18 ` Bjorn Andersson
@ 2022-07-01 4:40 ` Vinod Koul
0 siblings, 0 replies; 6+ messages in thread
From: Vinod Koul @ 2022-07-01 4:40 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andrey Konovalov, agross, robh+dt, krzysztof.kozlowski+dt,
linux-arm-msm, devicetree, linux-kernel
On 30-06-22, 09:18, Bjorn Andersson wrote:
> On Wed 22 Jun 00:18 CDT 2022, Vinod Koul wrote:
>
> > On 11-06-22, 22:57, Andrey Konovalov wrote:
> > > The current settings refer to "blsp_spi1" function which isn't defined.
> > > For this reason an attempt to enable blsp1_spi1 interface results in
> > > the probe failure below:
> > >
> > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> > > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
> > >
> > > Fix this by making the functions used in qcs404.dtsi to match the contents
> > > of drivers/pinctrl/qcom/pinctrl-qcs404.c.
> >
> > Right, I cannot find blsp_spi1 which is the only one which is missing,
> > not sure why...
> >
> > Bjorn do you recall why SPI1 is treated differently...
>
> Looking at the available pinctrl functions, I believe that blsp_spi1 has
> two possible mux options; identified b y blsp_spi_*_a1 and
> blsp_spi_*_b1.
Yes, so are we good to merge this?
--
~Vinod
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
2022-06-11 19:57 [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 Andrey Konovalov
2022-06-11 20:03 ` Andrey Konovalov
2022-06-22 5:18 ` Vinod Koul
@ 2022-07-03 3:55 ` Bjorn Andersson
2 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:55 UTC (permalink / raw)
To: Andrey Konovalov, agross
Cc: linux-arm-msm, linux-kernel, devicetree, vinod.koul,
krzysztof.kozlowski+dt, robh+dt
On Sat, 11 Jun 2022 22:57:13 +0300, Andrey Konovalov wrote:
> The current settings refer to "blsp_spi1" function which isn't defined.
> For this reason an attempt to enable blsp1_spi1 interface results in
> the probe failure below:
>
> [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
> [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1
commit: 2cac6baf0249cdd3748128f3196c2d203b06a4af
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-07-03 3:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-06-11 19:57 [PATCH] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 Andrey Konovalov
2022-06-11 20:03 ` Andrey Konovalov
2022-06-22 5:18 ` Vinod Koul
2022-06-30 14:18 ` Bjorn Andersson
2022-07-01 4:40 ` Vinod Koul
2022-07-03 3:55 ` (subset) " Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).