[PATCH v3 2/3] dt-bindings: mfd: atmel,flexcom: Add new compatible string for lan966x

[Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>]

LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
functions being configured.

Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
---
v2 -> v3:
 - Add reg property of lan966x missed in v2.

v1 -> v2:
 - Use allOf:if:then for lan966x dt properties

 .../bindings/mfd/atmel,flexcom.yaml           | 75 ++++++++++++++++++-
 1 file changed, 73 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
index cee9c93ce4b9..d9b0fe2b0211 100644
--- a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
+++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
@@ -16,10 +16,13 @@ description:
 
 properties:
   compatible:
-    enum: atmel,sama5d2-flexcom
+    enum:
+      - atmel,sama5d2-flexcom
+      - microchip,lan966x-flexcom
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clocks:
     maxItems: 1
@@ -46,6 +49,27 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 3]
 
+  microchip,flx-shrd-pins:
+    description: Specify the Flexcom shared pins to be used for flexcom
+      chip-selects.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 20
+
+  microchip,flx-cs:
+    description: Flexcom chip selects. Here, value of '0' represents "cts" line
+      of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
+      "rts" line of flexcom USART or "cs1" line of flexcom SPI.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
+
 patternProperties:
   "^serial@[0-9a-f]+$":
     description: See atmel-usart.txt for details of USART bindings.
@@ -72,6 +96,25 @@ required:
   - ranges
   - atmel,flexcom-mode
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,lan966x-flexcom
+
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+          items:
+            - description: Flexcom base regsiters map
+            - description: Flexcom shared registers map
+      required:
+        - microchip,flx-shrd-pins
+        - microchip,flx-cs
+
 additionalProperties: false
 
 examples:
@@ -100,4 +143,32 @@ examples:
                 atmel,fifo-size = <32>;
           };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx3: flexcom@e0064000 {
+          compatible = "microchip,lan966x-flexcom";
+          reg = <0xe0064000 0x100>,
+                <0xe2004180 0x8>;
+          clocks = <&flx0_clk>;
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges = <0x0 0xe0040000 0x800>;
+          atmel,flexcom-mode = <2>;
+          microchip,flx-shrd-pins = <9>;
+          microchip,flx-cs = <0>;
+
+          spi3: spi@400 {
+                compatible = "atmel,at91rm9200-spi";
+                reg = <0x400 0x200>;
+                interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_flx3_default>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                clocks = <&nic_clk>;
+                clock-names = "spi_clk";
+                atmel,fifo-size = <32>;
+          };
+    };
 ...
-- 
2.17.1