From: Dinh Nguyen <dinguyen@kernel.org>
To: jarkko.nikula@linux.intel.com
Cc: dinguyen@kernel.org, andriy.shevchenko@linux.intel.com,
mika.westerberg@linux.intel.com, robh+dt@kernel.org,
krzk+dt@kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCHv3 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
Date: Mon, 13 Jun 2022 16:00:31 -0500 [thread overview]
Message-ID: <20220613210032.773826-1-dinguyen@kernel.org> (raw)
The I2C pins on the SoCFPGA platforms do not go through a GPIO module,
thus cannot be recovered by the default method of by doing a GPIO access.
Only a reset of the I2C IP block can a recovery be successful.
The assignment of the recover_bus needs to get done before the call to
devm_gpiod_get_optional(), otherwise, the assignment is not taking place
because of an error after returning from devm_gpiod_get_optional().
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3: simplify the function
update commit message
v2: remove change to MODEL_MASK
s/i2c_custom_scl_recovery/i2c_socfpga_scl_recovery
---
drivers/i2c/busses/i2c-designware-core.h | 1 +
drivers/i2c/busses/i2c-designware-master.c | 12 ++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 1 +
3 files changed, 14 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 70b80e710990..7b22ec1d6a96 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -303,6 +303,7 @@ struct dw_i2c_dev {
#define MODEL_MSCC_OCELOT BIT(8)
#define MODEL_BAIKAL_BT1 BIT(9)
#define MODEL_AMD_NAVI_GPU BIT(10)
+#define MODEL_SOCFPGA BIT(11)
#define MODEL_MASK GENMASK(11, 8)
/*
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 44a94b225ed8..502820b812a5 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -813,12 +813,24 @@ static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
i2c_dw_init_master(dev);
}
+static int i2c_socfpga_scl_recovery(struct i2c_adapter *adap)
+{
+ i2c_dw_prepare_recovery(adap);
+ i2c_dw_unprepare_recovery(adap);
+ return 0;
+}
+
static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
{
struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
struct i2c_adapter *adap = &dev->adapter;
struct gpio_desc *gpio;
+ if ((dev->flags & MODEL_MASK) == MODEL_SOCFPGA) {
+ rinfo->recover_bus = i2c_socfpga_scl_recovery;
+ adap->bus_recovery_info = rinfo;
+ }
+
gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
if (IS_ERR_OR_NULL(gpio))
return PTR_ERR_OR_ZERO(gpio);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 70ade5306e45..b33e015e6732 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -153,6 +153,7 @@ static const struct of_device_id dw_i2c_of_match[] = {
{ .compatible = "snps,designware-i2c", },
{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
+ { .compatible = "intel,socfpga-i2c", .data = (void *)MODEL_SOCFPGA },
{},
};
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
--
2.25.1
next reply other threads:[~2022-06-13 21:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-13 21:00 Dinh Nguyen [this message]
2022-06-13 21:00 ` [PATCHv3 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller Dinh Nguyen
2022-06-15 10:18 ` [PATCHv3 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms Andy Shevchenko
2022-06-15 10:23 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220613210032.773826-1-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=jarkko.nikula@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).