From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Linh Phung <linh.phung.jy@renesas.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm64: dts: renesas: r8a779f0: Add HSCIF nodes
Date: Tue, 14 Jun 2022 11:51:09 +0200 [thread overview]
Message-ID: <20220614095109.8175-1-wsa+renesas@sang-engineering.com> (raw)
From: Linh Phung <linh.phung.jy@renesas.com>
Extracted from a bigger patch in the BSP, rebased and DMA
properties added.
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Change since v1: include all HSCIF
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 68 +++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index d89064f86d85..6efbd1fe1e68 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -271,6 +271,74 @@ i2c5: i2c@e66e0000 {
status = "disabled";
};
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+ <&dmac1 0x31>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+ <&dmac1 0x33>, <&dmac1 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+ <&dmac1 0x35>, <&dmac1 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a779f0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+ <&dmac1 0x37>, <&dmac1 0x36>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779f0",
"renesas,rcar-gen4-scif", "renesas,scif";
--
2.35.1
next reply other threads:[~2022-06-14 9:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-14 9:51 Wolfram Sang [this message]
2022-06-15 8:58 ` [PATCH v2] arm64: dts: renesas: r8a779f0: Add HSCIF nodes Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220614095109.8175-1-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linh.phung.jy@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).